Rgoh
10-23-2008, 10:34 AM
Hey guys,
Just got myself a 2100 for my Gaui200. I have watched Finless's vids on HG5000. But im having soon problem here, i cant even get the gyro to recongize my 12FG. I have set my SUB TRIM to 0, ridder TRIM to 0, GAIN = 0% in both Avcs and normal, Travel/Limit = 100%/135% (Both of these are stock settings)
As Finless mentioned, I hold my rudder stick to either end, then power up the gyro and wait for the gyro to recongize my radio. In his vid, he could switch between AVCS and normal mode, and the red LED is lighted up at the end ( + side).
But for my case, the TL green LED light keeps blinking, and the red LED is lighted up on the left most side ( - side). I could not switch between AVCS or normal mode.
Can anyone tell me what have i done wrong? :(
Thanks in advance!
Just got myself a 2100 for my Gaui200. I have watched Finless's vids on HG5000. But im having soon problem here, i cant even get the gyro to recongize my 12FG. I have set my SUB TRIM to 0, ridder TRIM to 0, GAIN = 0% in both Avcs and normal, Travel/Limit = 100%/135% (Both of these are stock settings)
As Finless mentioned, I hold my rudder stick to either end, then power up the gyro and wait for the gyro to recongize my radio. In his vid, he could switch between AVCS and normal mode, and the red LED is lighted up at the end ( + side).
But for my case, the TL green LED light keeps blinking, and the red LED is lighted up on the left most side ( - side). I could not switch between AVCS or normal mode.
Can anyone tell me what have i done wrong? :(
Thanks in advance!