Gyro gain from the Gov menu with 6100 and x9303

[dhoff002]

How do I setup the x9303 to use the Gov menu off of the gear channel, so I can control gyro gain with my 6100 and 6200 receivers?

Any advice would be great.

Thanks,

Dan

[george0079]

Why not just use the ATV's for the gear channel?

[george0079]

ATV -100 to 0 is rate mode, and 0 to +100 is HH mode

[Pinecone]

You can't. So use the Gear channel and ATVs as has been said.

X9303 only uses Aux 2 for Gyro Gain menu.

[gtrick90]

Use the Governor menù instead!!!

0 +100 AVCS MODE
0 -100 RATE MODE

Luca

[dhoff002]

How much gain from ATV or GOV menu would be equivelant to my current 72% gain on my DX7 gyro sense menu?

Thanks,

Dan

[dbart]

INHibit the Gyro Sensing and you can then use the Gear Switch and ATV values for the gyro. I didn't like using the governor mode because it was tied to the flight mode switch. Having a separate switch (gear switch) made more sense.