DX6I ----> DX7 HELP!!

[LockMD]

I recently got a DX7 and transferred all my DX6I settings to it, still needed to make additional changes to make the servos move correctly I had to reverse elev and change the pitch in swash mix from - to +

But here is the problem, It doesnt seem do recognize my gyro :confused:

I set it under gear to use gear and then put the same values as my DX6I had 68 and 25, spin it up and wags like crazy. Set down to change settings and now the Gyro menu isnt even available :confused:

any help appreciated. Thanks.



Edit: I should also mention the rx is an AR6100e and the gyro is a GY401


Edit#2: never mind I figured it out.

[phantom1500]

the gyro menu only becomes accessable when the gear or aux2 is set to gyro, I have my aux2 set to gyro and the gear set to gear as this is my switchglo trigger.


once thats done you will get the gyro menu

[GYRO SENS}
>RUDD D/R
RATE:
0: 25
1: 68

that should be all you need to do.