View Full Version : Optional Motors 8 and 10
lextek
10-25-2008, 01:48 PM
Readyheli.com is listing 2 optional motors. The 8 and 10. What application would these be best for?
invertmast
10-25-2008, 02:38 PM
4S and 6S i would assume.
BOOGIE
10-25-2008, 05:32 PM
The 8 is a 3595kv for 3S and the 10 is 3000kv for 4S
invertmast
10-25-2008, 05:46 PM
The 8 is a 3595kv for 3S and the 10 is 3000kv for 4S
if the -8 is a 3S motor, then why include a -6 motor? Other than i realize the -6 will give higher performance but at the trade off to lower flight times?
BOOGIE
10-25-2008, 07:07 PM
The 6 is a 4400kv and would give the highest HS and the lower flight time.
Trevor January
10-26-2008, 12:11 AM
so what motor will we have to run for a 6s set up
invertmast
10-26-2008, 08:45 AM
so what motor will we have to run for a 6s set up
if scorpion doesn't have one out b y the time i get my rave, i'v been recommended to run a medusa 028-040-1700V2H
Trevor January
10-26-2008, 10:39 PM
it's to bad that no one can make a motor that can do all the cell counts and have a varible kv rating one motor to rule them all he he he :thinking
rappyrex14
10-27-2008, 02:07 PM
basically...
-6 has crazyyyyyyyy power. low efficency, low runtimes, high temps....11-13 toothish...3 cell
-8 has crazyyyyy power, better efficency. medium runtimes...good temps...13-14 toothish...3 cell
-10 4 cell motor
ric4nier
10-31-2008, 01:59 PM
I'm going to put my scorpion 6 on ebay to buy the 10 for 4s setup, wondering if there more than one choice for the scorpion 10 ?? also what kind of flight times can I expect?? I plan on using outrage lipo's should I use the 1800 or can I use the 2200 size 4s packs>
Thanks for the help
Rick
Long Nguyen
11-13-2008, 05:18 PM
so what motor will we have to run for a 6s set up
The new Scorpion 2221-1630KV will be suitable for 6s. I have it on my outrage G5 and I love it more every time I fly it.