consnsus

[mongo]

..

[PDC]

Hi!

Have tested the new Actronic 12S 120A controller the whole day yestoday in my Ion-X together with a 12S battery and the NEU 1521-1.5Y motor, plus some flights before that.

Conclusion is that this controller is for old mens with soft hat, as there is a rpm limit build in to this controller that remove all the fun with 3D.

Even not together with the 8 pole Actro motor I think this controller is any good for wild 3D.

If one can live with this rpm limit, it has a very nice softstart, and a really good governor.

I will hopefully have my new 14S Schulze today, look forward to test it on the Ion-X. Also Kontronic will soon have a 15S controller we have to find out how works.

I DONT NEED LIMITING HARDWARE............

[BobbySmith]

The CC110 works great it only took 2 tries for me to get one that worked right all in all i would definately buy another one


B

[WillJames]

My CC-110 is working great. Airplane mode is pretty hard on secondaries with the 14MZ and G3 RX. I am going to try using some throttle delay to help.

I don't like Governor mode with my setup though....

Overall a good ESC after 25+ flights.

[bob00]

My 100-HV worked well last season, about 100 or so flights. I don't use governor or soft start - treat it just like a nitro machine - spool up nice and easy on the sticks.

Will be getting another for my other Ion.

- Rob

[PDC]

I was originally planning to buy one or two of these CC 12S controllers, but got scared of all these stories where this esc failed, but maybe CC have fixed the problems now?

Got the Schulze 14S controller, double size and price, so one can expect this one to work, and it actually works good :-).
Maybe overkill for a Ion-X with a average amp flow of 30A, but also a controller that one knows just works.

Ordered some bigger gearings for my Joker2, so the Actro controller will have one more chance to prove that it can give torque in combination with the actro motor now when it will not allow one to have rpm.

- Paul