Help Gyro Sens

[Racer38]

Well I just changed over to the Spectrum Module for my 9303, mainly because the LHS carries all the RX's

Just changed over from the XPS.

Anyway I cant seem to get my Gyro sens working with a 6200 RX .. Wags like crazy and I cant adjust the sensitivity.

On my XPS system it was plugged into channel 7 but this only has 6 channels, cant figure out how to get it working on the radio ??

HELP .. I know I probably need to change something in the Device Sel in the master menu ??

Thanks Craig

[Racer38]

Well after playing with this for quite some time I did get the sens to work on the gear switch, unfortunately I cant get it to work as it did on my 8 ch rx using aux2 and the Gyro menu on the Fmod switch. That is unless one of you JR Guru's knows how to do it.

Thanks Craig

[Pinecone]

Gyro sense on the 9303 ONLY works on Aux2.

To use a 6 channel Rx, you plug the gyro gain into teh Gear channel. Set Gear to Gear and use teh gear endpoints to adjust gain.

[Racer38]

Thanks Terry and as you can guess I went Spectrum hahaha The LHS has them in stock and lots of RX's for decent prices so I said what the hell ...

[Pinecone]

The Rx price is what has me in the Spektrum camp.

And since you have an XP9303, you can easily switch to an X9303 to gain Model Match and Servo Synch, and a LARGE timer display. WIth teh two, you can copy your setups from one radio to the other.

[max232]

what are your endpoint settings? i cant figure out what they should be set at?
i should mention its a gy401.:arggg: