Service menu

[Roadrune]

Does anyone know how we can access the service menu (there's got to be one...) on the X9303/DSX9?

[andersminit]

That would be great to know :D

[sonofcar]

i know, but you dont want to mess with it unless you are talking to someone really smart.

Why do you want to know?

[Roadrune]

i know, but you dont want to mess with it unless you are talking to someone really smart.

Why do you want to know?

I was looking for a setting allowing you to select between EU and the rest of the world output effect.

[andersminit]

i know, but you dont want to mess with it unless you are talking to someone really smart.

Why do you want to know?

I want to recalibrate my sticks..
The ELEV is off in the MONITOR window..

[Racer38]

i know, but you dont want to mess with it unless you are talking to someone really smart.

Why do you want to know?

Are ya gonna keep it a secret ??

I would be curious if you can do Stick Calibration, I know in some of the old Futaba systems you needed the add on card that allowed you to do some calibration stuff on the radio, I had one for my 9ZWCII and I use to Calibrate the sticks every spring.

I would just like to know so I can see what is actually in the Maintenance Menus ..

Thanks

Craig

[sonofcar]

ok, i am kinda rusty on it now(i forget stuff) but if you want to know pm finless bob he knows:thumbup:

[0KEWL]

http://bbs.5imx.com/bbs/redirect.php?fid=29&tid=236022&goto=nextnewset

Mainly Chinese but one can read the important part...

Regards, Lars

[Racer38]

Yup that works ... Thanks Lars !

[Racer38]

Just a quick note, I calibrated the sticks on my X9303 and it worked perfectly. Thanks again for the info on getting to the Service Menus !

[andersminit]

Hi
I dont get it to work on the DSX9
What am i doing wrong??

[Racer38]

I know it some times took me 8 or 10 times flipping the switch combination to get it into service menu ..

[andersminit]

got my sticks calibrated and now the radio is so much smother.....

[sgrim80]

got my sticks calibrated and now the radio is so much smother.....

How so? Aren't the stick calibrated from the factory?

[andersminit]

How so? Aren't the stick calibrated from the factory?


they are but as i posted befor one of my sticks was not spot on in the monitor window and that hawe bin bugging the H*** out of me.. but nowe its spot on and the sticks feels much smother.. :D

[Roadrune]

http://bbs.5imx.com/bbs/redirect.php?fid=29&tid=236022&goto=nextnewset

Mainly Chinese but one can read the important part...

Regards, Lars

I have tried and tried, and i cannot get in to the menu....

Are ALL switches supposed to be off (forward)?

Will the menu pop up in the last step, or will it show up somewhere else?

[MavriC]

Before doing the following steps, make sure you have an empty model selected. I tried to do this while using a programmed model (T-REX 450SE V2) and I kept getting a "SW WARNING !" error. This is because I have a Throttle Hold function programmed into that model, hence stopping me from entering the Service Menu mode. When you have an empty model selected, the error will not occur.

So just select an empty model.

Rick.

[Roadrune]

I found out.... Just need to hold the trainer switch during the whole procedure....

Thr. hold should be OFF, to enter the menu...

[JimRC30]

Can someone tell me how to do this in english?:confused: The link only shows Chinese characters. I feel like my pitch stick is "centered" at 56 in/out as when it is at 50/50 swash is dead level, washout arms dead level, flybar cage dead level....you get the idea. BUT, my pitch is not level at center stick. It is -2 degrees. What convinced me it was the radio was that this occurs on both my 450seV2 and 500 ESP.

Now of course this could be me but it seems very coincidental that moving the stick on both models to 56 in/out would level the flybar to 0 pitch.

Any thoughts?

Jim-

[unwind-protect]

It's not the same as for the 9XII by any chance, is it?

http://www.rcheliwiki.com/JR_9XII_service_menu

[JimRC30]

It's not the same as for the 9XII by any chance, is it?

http://www.rcheliwiki.com/JR_9XII_service_menu


That actually did work with the Throttle Hold and a new model. Thanks!

Unfortunately the menu made me nervous as I don't want to screw too much with it. I thought there might be a clear cut way to "recenter" the sticks.

[unwind-protect]

Nope, I don't dare probe any deeper, either!

[painfulking]

i have a jr dsx9 and i keep getting this warning "sw warning" and "f.mode sw" what should i do?

[painfulking]

guys i have a jr dsx9 and i keep getting a warning "sw warning" and "f.mode sw" what should i do?

[painfulking]

i have the jr dsx9 and i keep getting this warnning "sw warnning" and "f.mode sw" what should i do?