PDA

View Full Version : Batteries for Walkera 4G3


roytman
12-06-2008, 01:06 PM
Are there any different batteries for this helicopter? I know, that batterie of my friend was blew up after 4 flight((( Maybe make from 2S batteries two bank, but i think it will be really big for Walkera((((

Dusty1000
12-07-2008, 06:26 PM
You can use the old 400mAh or the new 600mAh. I've have several of these 400mAh batteries, had some since January and no problems with any of them apart from the wires are a bit weak.

You'll get both batteries here: http://www.chinesejade.com/walkera.htm

roytman
12-08-2008, 03:27 AM
Its good. Ok, i will by 600 and 400. I think 600 will be the best choice for this heli.

helifrek
12-09-2008, 12:14 AM
check out the 600mah 20C lipo from hobbycity.com it costs about $3 bucks and works great. brand name is zippy

Brandon

roytman
12-09-2008, 05:45 AM
I see them, but what about their size? I think it is too big for this heli.

helifrek
12-09-2008, 05:53 AM
http://www.rcgroups.com/forums/showthread.php?p=11087668#post11087668

only a little extra weight but they do work, you will have to modify the battery tray.

roytman
12-09-2008, 06:16 AM
It look perfectly. I will by some for try. Thanks.

roytman
12-09-2008, 06:17 AM
And how long heli fly with them.

helifrek
12-09-2008, 06:40 AM
i think he posted that he gets about 13min, but if your running the stock motor make sure you land and let the motor cool for a min periodically

roytman
12-09-2008, 07:19 AM
Hm, and i Know that there is no other motors for 4G3. Dont that?

helifrek
12-09-2008, 01:18 PM
i don't know if there are any brushed replacement motors but I went brushless on mine. a fiegao 10,430Kv motor and XP-7A esc does the trick quite well. I am selling mine for $210 shipped in the US.

roytman
12-10-2008, 05:42 AM
And what about tail motor?

helifrek
12-10-2008, 06:39 AM
if you want, you can mod the tail and go brushless. check out rcgroups.com go to the micro electric forum and find "the new 4G3 submicro ccpm" thread. has all the info you need.

Brandon

roytman
12-10-2008, 07:42 AM
Ok, thanks.