BEAM E4

[Phoenix Flyer]

Heya Guys,
Here is a video of me flying my beam ,
http://au.youtube.com/watch?v=0k5dTueaJB0

Let me know what u think,

Hamish

[Jetleaf]

Wow, impressive. :noteworthy Very nice. What is your power system? And which blades are you using?

[Shockwave 3K]

Wow, impressive. :noteworthy Very nice. What is your power system? And which blades are you using?
BEAM E4. 2221-8, Scorpion 60a, Radix 325's, Radix 59mm, Ino-labs Servos, 7703d


Killer flight! That was great!:thumbup: I need to get a beam.

[Phoenix Flyer]

Hey, Thankyou.

My set up is like rockin heliboy said.

Scorpion 8 ( 13t Pinion), Scorpion 60a ( Gov. mode 80%), ino-lab 202mg's. JR 770+Ino-lab 261hb, AR700,

I am running Radix 325 mains, standard tail blades in the vid. Now running Radix 59mm. Cant realy tell the difference.

Cheers
Hamish


Wow, impressive. :noteworthy Very nice. What is your power system? And which blades are you using?

[Phoenix Flyer]

Thanks, You should get a Beam.
You wont regret it,


BEAM E4. 2221-8, Scorpion 60a, Radix 325's, Radix 59mm, Ino-labs Servos, 7703d


Killer flight! That was great!:thumbup: I need to get a beam.

[oldschool269]

please post this up on Arc heli ...its a sick awesome wicked flight ...

its boring posting to myself ...by myself alone on the beam forum...

dudes got skills

lol's

Jason

[tibbs]

Hamish, where did you get your Radix from.


cheers


Tibbs

[Phoenix Flyer]

Tibbs.
I get my Radix from a local distributor in Melbourne.
I think that the radix's are a better blade than the SWE's
If you can get some do it, They are the best.
What set up you running Tibbs?
Cheers
Hamish

[Jetleaf]

Hey, Thankyou.

My set up is like rockin heliboy said.

Scorpion 8 ( 13t Pinion), Scorpion 60a ( Gov. mode 80%), ino-lab 202mg's. JR 770+Ino-lab 261hb, AR700,

I am running Radix 325 mains, standard tail blades in the vid. Now running Radix 59mm. Cant realy tell the difference.

Cheers
Hamish

I never saw your sig Hamish I was so amazed by your flight. My bad. I agree with you about the Radix mains. I loved the SWE's till I tried the Radix. I like the Align 325's too. But the Radix definitely have the pop. Have you tried any larger pinions? Oh I'm curious did you try the Inolab 201 on the tail?

[Phoenix Flyer]

I never saw your sig Hamish I was so amazed by your flight. My bad. I agree with you about the Radix mains. I loved the SWE's till I tried the Radix. I like the Align 325's too. But the Radix definitely have the pop. Have you tried any larger pinions? Oh I'm curious did you try the Inolab 201 on the tail?


I havent tried any other pinions aside from the 13t. Which i believe is the large one in the kit, Yeah the Radix's are good. V's are also good. But hard to get at the moment,
I have flown beams with 201's on the tail yes.its a little bit better than a HS-65hb on the tail. Would be good for most sport fliers. I am running the 202MG's on cyclic and the 261HB on the tail. Like my sig. mentions i run Ino-lab in my Synergy aswell. I wouldnt go back to my hi-tecs now.
Feel free to pm me about any ino-lab, beam or phoenix questions.. as i am a sponsered pilot here in oz and am very familiar with all three products.

[newbeamheli]

i just bought a beam this month on the way to setup, but it was cool

[valuepack]

Amazing.

are you running a123 in this video? just curious.
http://www.helifreak.com/showthread.php?t=119351

valu

[Phoenix Flyer]

Amazing.

are you running a123 in this video? just curious.
http://www.helifreak.com/showthread.php?t=119351

valu

Hi,
In that video no. I should probably do a flight with a123 to show you all
Cheers
Hamish