Post your Odin, Knight, 3Dplus pics & videos here !!

[Mercuriell]

Well maidened her today and very nice she is too - very stable but ready to fly off at a moments notice - thanks to Gavin for piloting :noteworthy while I took the photos

[Mercuriell]

Setup:

ALign 91HP motor with ALign 91 pipe
BLS 451 on cyclic
BLS 251 on tail
AR7100R running 7.4V to cyclic
Spartan DS760
Radix 690 & ALign 105
AUW RTF (wet) 4.6kg

XW4gU3T5NVY

[Aussie_G]

Seems to fly pretty well, what is your setup?

On another note, Man I miss the Sunshine Coast, I lived in Beenliegh before moving here to South Carolina...

[regiepogi]

Santa must've been getting older. He didn't give me an Odin.:(

[NolanManley]

Built but not flown yet.

Odin Kit
YS91SR
Hatori SB-19 Pipe
Hitech 6975 on Cyclic
GY611 w/9256
Futaba S9253 Throttle
Multi Gov Pro
Perfect Regulator 6V
Outrage 2S 3600 Lipo
Radix 710
K&B TR blades
Total weight no fuel 9 lbs 4.2 oz.

Pics later. Build thread here; http://www.runryder.com/helicopter/t481143p1/

[wufei]

hi guys, I just want to share the video of my flight with my friends here in the Philippines last year. I flew for a year and half and still so much things to learn. My heli is a old version k3d with os 50 engine, GY401 and 9254 on gyro and nothing more.

http://www.youtube.com/watch?v=a0doClzLRik




Thanks and please enjoy my video.

[Mercuriell]

No hardcore 3D here - just a nice sunny Sunday afternoon lazing around the sky with the Odin :) - for those of you suffering winter you might want to check out what a blue sky looks like !!

Compass Odin - sport - light 3D flight 23MB wmv (http://video.helifreak.com/?subpath=mercuriell&filename=OdinSMF2.wmv)

[Tradhunt]

Got my Odin in yesterday. Almost done with the basic build. I'm still waiting on my electronics and engine. I'll post some pic's tonight.

I plan on running...

Ys or Align 91 I haven't made up my mind yet.. With the RJX 90 pipe

Ino-Labs 751mg servos

Solid-G/9256

Perfect regulator CCPM version

Atg since I have never tried one I've always ran multigov's

Rotortech 710 main's and Rotortech tails...

[Mercuriell]

Maidened my Knight 3D today (thanks Ben for the build :thumbup:) - gee that's a pretty little heli with the SAB Red Devils on - didn't realise there was so much nice blue bling on the head. Anyway was a new motor (OS50 Hyper) so we ran her rich but wow - she flips on a pin and roll was pretty impressive too - really looking forward to flying this heli (if I can get it back off Ben ;))

OS 50Hyper SX - SAb Red Devil 600 - ALign 95 tail - GY611 & 9256 - Align 620 on 8V from AR7100R

[Auto180]

Maidened my Knight 3D today (thanks Ben for the build :thumbup:) - gee that's a pretty little heli with the SAB Red Devils on - didn't realise there was so much nice blue bling on the head. Anyway was a new motor (OS50 Hyper) so we ran her rich but wow - she flips on a pin and roll was pretty impressive too - really looking forward to flying this heli (if I can get it back off Ben ;))

OS 50Hper SX - SAb Red Devil 600 - ALign 95 tail - GY611 & 9256 - Align 620 on 8V from AR7100R
Its great looking ;):wow2:

[KandB]

http://de.youtube.com/watch?v=r22IzRHBnKo

Atom video
Looks cool in the snow!!!

Kevin

[alain_soresca]

Hi Mercuriell, may i request a picture of the Odin and Knight3D side by side for us to have an idea on the size diff.? thanks:)

[Mercuriell]

This is the best pic I've got at the moment - not sure of the owner so hope they don't mind me posting :) - My Knight borrowed by my buddy so I 'll post my own version in a few days !!

[regiepogi]

If my memory serves me right, I think the owner is Kimber1911. A fellow Filipino who's now in Seattle.

Alain, I'll make another build log. This time the Odin. :D Of course you can fly it as well once it's built.

[Mercuriell]

Here's the two girls out sunning themselves before a bit of aerial abuse ! As you can see similar size - just a longer boom on the Knight - goes with the concept of a 90 engine in a 50 frame :smokin:

[alain_soresca]

Mercuriell - thanks for the pictures.:)

regiepogi - wow another heli? that would be great.. thanks for the offer sir. see you soon.:YeaBaby:

[krunder]

Here are some pictures of my setup, and a video:

http://www.thepitchbrothers.com/index.php/setup-section/120-90-size/166-odin-setup

Best regards Krunder

[Tradhunt]

Well here's mine. Finally... I made a couple change's to it then what I listed in an earlyer post. I haven't gotten the chance to fly it yet (weather) still need to break-in the engine...

My setup:
OS 91Hz
Outrage 90 pipe
Solid-G/9256
Align 610 servo's
Fromeco reg.
Outrage 2s 3600
Rotortech 710 main's
Rotortech 105 on the tail
Multigov/Hs-85 throttle

Ignore the bad wiring job. Been test fitting and I might change the setup a bit with some 8717's and a AR7100R for an 8v setup. That will take up less space and I'll just plug the fan into the 8v throtle port.

[regiepogi]

Nice setup Tradhunt. I would love to know the things you did and materials as well to relocate the rudder servo in front.

[Mercuriell]

Nice setup Tradhunt. I would love to know the things you did and materials as well to relocate the rudder servo in front.

Looks like T700 pushrod and crank - nice job ! :thumbup:

[Tradhunt]

Hey Regiepogi and Mercuriell,
Thanks, Yes it's an Align tail pitch lever and the landing gear mount's off of a 600n I buy my CF rod's from centeral hobbies you can get them in the combo... that includes the rod's and ends. i cut them down to fit and epoxy them together.

I've been making them for several year's for my K3D's and they work out great.

I use 3/16th rod that come with 2.5mm ends from Central Hobbies.
Align frame mount blocks (HN6019)
Align metal tail control arm (HN6038
Thundertiger ball links (PV0041) they thread on the 2.5mm ends good.
Century Tail rod guide Adjustable (HI6106) Predator 60-90.

[regiepogi]

Tradhunt - thanks man! How about a close up pic of the bell crank mounted at the Odin? TIA!

[Tradhunt]

No problem give me about an hour or so.

Ok a bit sooner then I thought... very easy mount. I use the front hole out of the 2 their and redrill a new second mount hole.

Hope these pic's help out.

[regiepogi]

Genius! Thanks again! I really appreciate it!

[THuhtamaki]

Here's couple of pictures of my former Knight Sport, nowadays Super Sport :P