G401 and a 9303 set up help

[Felony44]

I have a problem setting up my gyro with the 9303 when i follow the set up instructions on raptortech somewhere in the programing i lose the AUX2 listing in the radios menu when i goto make a change to it AUX2 is gone the only thing there is ---- everything else shows up but any refrence to AUX2 is gone and i cant configure the gyro if i reset the radio to factory defaults it shows up then somewhere in the programing i lose it again :arggg: does anyone know whats happening or what i can do to fix it??

[WayneBrown]

Are you using the Gyro sens menu? If so, then you HAVE to go to GYRO SENS to adjust gain.
I tried it all, got confused and INH the gyro Sens crap, and simply use CH5.

[Felony44]

Yes i am using the Gyro sens i think what happens is when you set it up it eliminates the AUX2 settings and any changes have to be made to the rudder setting, i could be wrong though

[WayneBrown]

Rudder ATV only controls the speed of the turn, or more correctly: piroette
If you Enabled the gyro sens sub menu, you will have to use the gyro sens settings to adjust the gain.

[collectivepitch]

LAMEBIRD
i just switch from futaba to jr. i got my 401 setup using ch5. what will be a good start setting for the gain on the 9303. on my 9c it was set at 65% hh & norm.

[WayneBrown]

I generally start at about 65% or so. That seems to be pretty typical across transmitter brands.

[collectivepitch]

ok, thanks. someone said it had to be a negative # for jr.

[WayneBrown]

ok, thanks. someone said it had to be a negative # for jr.
news to me...
I currently have 5 choppers setup on the 9303, and all are between 58-65%.

[collectivepitch]

THANKS!! Good to hear.