Drillsize in Stratus manual

[Ante]

I was looking in the manual and found out that I am going to need some
drill in various size.

Is there anyone who can tell me what size the following is in millimeter?

#29 (3/32")
#42
1/8"
3/16"
17/64"

Thanks!

[cdrking]

http://www.csgnetwork.com/drillsizeconvert.html

[Ante]

OK thanks!

But how about the "#29" and "#42" in the manual, what size is it on them?

[capebob]

Ante,

Here is a link for all the numbered and lettered bit sizes. Once you get the decimal equivalent in inches convert that to metric. For instance #29 bit is .1360 inches or M3.4544. #42 bit is .0935 inch or M2.3749. Fortunately the sizes aren't all that critical so you really don't have to find a M2.2749 bit.

http://www.thedirtforum.com/conversions.htm

Bob

[Ante]

OK thanks Bob!

Then if I calculated this right, the #29 drill should be aprox 3.45milimeter and the #42 should be aprox 2.4 milimeter.
Am I right?

[capebob]

Right!