HDX 450 Build Videos will be here

[Finless]

This will be a complete video set to build the HDX 450 Trex.

NEW:
Otter ESC Setup
Otter ESC setup video (19 Megs 320x200 rez) (http://video.helifreak.com/?subpath=finless/hdxbuild&filename=otter_esc.wmv)


FLIGHT DEMO
HDX 450 Flight Demo (18Megs 640x400 rez) (http://video.helifreak.com/?subpath=finless/hdxbuild&filename=hdx_demoflight.wmv)


Building the frames
HDX 450 Frame build (78Megs 640x400 rez) (http://video.helifreak.com/?subpath=finless/hdxbuild&filename=hdx450_frames.wmv)

Head Overview:
HDX 450 Head Overview (25Megs 640x400 rez) (http://video.helifreak.com/?subpath=finless/hdxbuild&filename=hdx450_headov.wmv)

Servo Installation:
HDX 450 Servo Installation (25Megs 640x400 rez) (http://video.helifreak.com/?subpath=finless/hdxbuild&filename=hdx450_servoinstall.wmv)

Installing head and main gear:
HDX 450 Head and maingear install (15 Megs 320x240 rez) (http://video.helifreak.com/?subpath=finless/hdxbuild&filename=hdx450_head_gear.wmv)

Servo Setup:
HDX Servo Setup (25 Megs 320x240 rez) (http://video.helifreak.com/?subpath=finless/hdxbuild&filename=hdxservo_setup.wmv)

Head Setup:
HDX Head Setup (25 Megs 320x240 rez) (http://video.helifreak.com/?subpath=finless/hdxbuild&filename=hdxhead_setup.wmv)

Tail Setup:
HDX Tail Setup (20 Megs 320x240 rez) (http://video.helifreak.com/?subpath=finless/hdxbuild&filename=hdx_tail.wmv)

Landing Gear Assembly:
HDX Landing Gear Assembly (10 Megs 320x240 rez) (http://video.helifreak.com/?subpath=finless/hdxbuild&filename=hdx_landinggear.wmv)

Electronics:
HDX Electronics (20 Megs 320x240 rez) (http://video.helifreak.com/?subpath=finless/hdxbuild&filename=hdx_electronics.wmv)

CCPM Interactions:
HDX CCPM interactions (20 Megs 320x240 rez) (http://video.helifreak.com/?subpath=finless/hdxbuild&filename=hdx_ccpmint.wmv)

Wrap up / Final go over:
HDX Final go over (20 Megs 320x240 rez) (http://video.helifreak.com/?subpath=finless/hdxbuild&filename=hdx_final.wmv)


If you all think 80 megs is too much I can bust ithe frames video into 2 parts or compress it more like to 320x200 rez?

Bob

[WayneBrown]

Hurry and get to the part about setup!
I just bought shiney blue stuff and all my linkage lengths are screwed! :D

[Finless]

Hurry and get to the part about setup!
I just bought shiney blue stuff and all my linkage lengths are screwed! :D

Wayne... your joking right?

I am kind of a serious person so I never can tell if someone is joking or not...

Bob

[tnreefguy]

wayne is never serious. lol

[Finless]

wayne is never serious. lol

I am new here so sorry I dont know the personalities yet ;)

Bob

[Finless]

This will be a complete video set to build the HDX 450 Trex.

Building the frames
HDX 450 Frame build (78Megs 640x400 rez) (http://video.helifreak.com/?filename=hdx450_frames.wmv)

Head Overview:
HDX 450 Head Overview (25Megs 640x400 rez) (http://video.helifreak.com/?filename=hdx450_headov.wmv)

If you all think 80 megs is too much I can bust ithe frames video into 2 parts or compress it more like to 320x200 rez?

Bob

Just added the head overview!

Bob

[GalenTillery]

Hey Bob,
Please think about a truly 'getting started' video.
Your work is priceless and we seriously appreciate your dedication and contributions!
Galen

[WillJames]

Looking great Bob!!!

[WayneBrown]

Hurry and get to the part about setup!
I just bought shiney blue stuff and all my linkage lengths are screwed! :D

Wayne... your joking right?

I am kind of a serious person so I never can tell if someone is joking or not...

Bob
Normally, I'd say yes I'm joking, but this is the rare occasion where I'm serious. I lost the book.. not that it had that very good information anyway, but now I have 6* positive pitch at mid.
I was joking about the 'hurry up' part, I'll wait patiently and will memorize the information contained when you get it posted, but I am serious about wanting to see it.

[RTHanley]

very nice videos thanks

[Finless]

Well I am in a RUSH now to get a tom of stuff done!
Mark at RumpRyder kicked me off along with all my other videos!
I now need to recompress all those and get them uploaded here too..... This will be an all day job to get those up as well as the HDX vids up.

Ray, I have ALL the HDX videos done I just have to get them compressed and uploaded.

Bob

[eheliflyer]

Mark at RumpRyder...
:lol: :lol: :lol:

[BarnOwl]

Anyone here got the HDX kit flying yet, I am just waiting for my new set of servo's to arrive so I wonder how it handles in the air.

[Finless]

Anyone here got the HDX kit flying yet, I am just waiting for my new set of servo's to arrive so I wonder how it handles in the air.

YES, I have mine done! It is what I used to make the end to end build videos. I will have them all uploaded by Monday night.

Bob

[BarnOwl]

Are you telling me you have a flying vid for the HDX?

[Finless]

Are you telling me you have a flying vid for the HDX?

No.... I didnt shoot a flying vid but if thats what you want to see I will see if I can shoot one today when I go flying!

Bob

[BarnOwl]

That would be nice to see, but you already have enough on your hands so don't make it a priority. I just like to know what you think of the bird.

[slowfly]

are these videos up for sale yet. I would like to have HDX on hand

[66 chevelle ss]

i need to know how the landing gear is installed and everything thing else i got a brand new hdx but dont wanna rush anything and mess it up. finless you are the man give em hell.

[robgt]

are these videos up for sale yet. I would like to have HDX on hand
Erm... click the links in the first post on this thread and download them :)
Or did I misunderstand the question!?
Cheers,
Rob

[66 chevelle ss]

the videos at the top dont complete the heli. theres still a lot of instructions missing

[falconea45]

I think if you read this thread, he said he would have them up for Mon night.
Let the man have some time to sleep. HeHe

[I3DM]

Guys, if anyone wants to see the HDX flying have a go at my website's electric video page:

http://www.liorzahavi.com/videos/other/

Number 8 and 9 from the bottom.

[Finless]

the videos at the top dont complete the heli. theres still a lot of instructions missing

I will be uploading the rest of them today!

Bob

[66 chevelle ss]

your the man finless. Im just wondering how far im from you im in pasadena but also go to lancaster on the weekends. Thanks for all of the help your the best