Actro 32-3 setting with 77-OH ESC

[thangd]

Hi All,
Can someone tell me (Chris) what is the best programming for the Actro 32-3 and 100T main gear. I have the program box, but would like a optimal programming parameter. Thanks in advance.

Thang

[Rickster]

Type: Heli
Controller type: M-77-O-H
Heli mode: Normal
Timing: 0
Frequency: 8 KHz
Acceleration: soft
Accumulator type: Li-ion/Li-pol
Number of cells: 10
LiIo/Po cut off V per cell: 3
Initial point: Automatic
End point: Automatic
Throttle curve: Linear
Rotation: Whatever you wiring needs
Timing monitor: On


With the 100T main you can bump up the timing to to 15* to help the HS a little, motor still seems to run cool..

Rick

[WillJames]

The hard 3D guys lower the Li/Po cutoff volts per cell to about 2.6 from what I have seen.

[thangd]

Thanks, everyone and I will set it for 15 degrees timing, and I ussual set for 2.9V cutoff. I am not hard 3Ding, and just good sport flying.

[WillJames]

You may want to consider setting the timing at 8. I have run mine as high as 30 but from my conversations with ChrisS and others, I have settled at 8. You WILL see a little power difference between 8 and 15, but it may or may not be worth the gain as repair on these motpors runs in the buy a spare while you wait type of thing from what I have heard..... Finding the 32-3 in stock is like finding a needle in a haystack these days...