How to enter the Service Mode on Futaba Radios

[Finless]

Here is my web site that explains how to get into Service Menus on many Futaba Radios!

Futaba Serives Menu Web Site (http://home.socal.rr.com/hotweb/futabaserv/)

Bob

[jonnywicked]

Here is my web site that explains how to get into Service Menus on many Futaba Radios!

Futaba Serives Menu Web Site (http://home.socal.rr.com/hotweb/futabaserv/)

Bob

will shorting both pins 2 & 3 to pin 7
also work on an early 9zhp (not WC or WC2)

thanks

[Finless]

I dont know... Someone Emailed me a few weeks ago stating that it did not work and if I knew why? Of course I have no idea since I have never tried it on that model.

All I can say it try it if you want.

Bob

[jonnywicked]

I dont know... Someone Emailed me a few weeks ago stating that it did not work and if I knew why? Of course I have no idea since I have never tried it on that model.

All I can say it try it if you want.

Bob


i'll give it a try and post my results

thanks
John

[jonnywicked]

I dont know... Someone Emailed me a few weeks ago stating that it did not work and if I knew why? Of course I have no idea since I have never tried it on that model.

All I can say it try it if you want.

Bob


i'll give it a try and post my results

thanks
John



Bob

many thanks for the info

it worked without a flaw and

my zhp is working fine again

keep up the good work

John

[bakofreak]

Finless any chance of getting the 9Z Setup Videos on Helifreak that you had on RR. Sorry that all you great info was deleted.

Kenneth

[Finless]

The video is up... It in my FINLESS videos post.

bob

[bakofreak]

Finless,

Thank you for the videos...I'm unable to find your video section.

Can you provide a link...?

Bakofreak

[Finless]

Here you go... this is for setting up the 9Z not how to put it in service mode as I never did a video for that only a web page.

http://www.helifreak.com/viewtopic.php?t=12455

Bob

[tmark65]

Hello there,

I have a 9zap WC series.

My issue is that when I bought the radio back in 99 I enter a password which I forgot and now I can't change the user name to something different.

Can yhou assist me on this ?

Best regards

p.s. Your videos about Trex are SUPERB, excellent job. Do they apply on my RTF?

[Finless]

If you forgot the passwrod then the ONLY way to reset it is to send it in our read my instructions for entering service mode!

http://home.socal.rr.com/hotweb/futabaserv/

Bob

[tmark65]

Thanks a lot for your info but at your site the 9Z Service Screens link is not working...

I PM you with an attachment!

regards

[Finless]

I fixed the link as they changed it on Model Gadgets.

I did not get a PM from you.

Bob

[BigX_UK]

:hug:

[ricoalonso]

Bob,
First of all, thank you for all the technical videos you had posted and this thread. I have a Futaba 9Z which I would think will need some servicing soon due to age (7-yr old).

I have a question in the instruction as to how to pull up the service menu for the 9Z. It says to connect pin 2&3 to 7 then power ON the Tx. Do the pins have to be held this way (connected together) until I am done with the service menu; or, are the pins need to be released after the service menu is displayed?

Thanks,
Rico.

[Caleb Phillips]

Based on what Bob said, it seems as if the pins need to be held connected so as they don't accidentally emit a pulse upon disconnecting.

[ricoalonso]

I see. Now I understand. Thank you 'jonphilli' for your input.

Rico.

[Finless]

Yes they need to be held the entire time!

Bob