can the 9303 buddybox with 8103

[collectivepitch]

tried tranferring from 9303 to 8103. 8103 kept giving error message.
any ideas?

[Peter]

they wont talk to each other.... cant b/box etc ..

[elviswl]

Yes.

Its actually pretty neat. In the past, I tried transferring the data points (manually) to the slave radio, but this requires adjusting endpoints etc.

With the 8103 as a Slave, the 8103 will only be used for Stick inputs while all of the other programming info remains with the 9303.......... No transfer of data is required ie. if you select IDL1 on the master 9303, then the 8103 will also change to IDLE1.

Start with a new model in the 8103, and PPM modulation.
Activate the trainer function in the 9303, and all trims, end points, programming etc. should be available to the 8103 once the trainer switch is engaged.


-elvis

[collectivepitch]

elviswl
thanks thats what i'm looking for. real easy.

let me throw this out.
9303 has the setting for the heli,but want to use it as the b-box and the 8103 as master. do i manually transfer all the setting to the 8103 plus the f-module. do set 8103 as master and the 9303 to slave.

[collectivepitch]

tried buddyboxing with a 8103 and it didn't work the way it was descrided. i had to adjust trims and pitch travel adjust. could i be doing something wrong?

[Peter]

Still cant get the Australian versions of these radios to talk to each other .. It'd be good if there was some standardisation , but no doubt theres a very good reason for it all ... probably $$$$$$$

Yeah I know ... I'm a cynic ..... :wink: :wink: