PDA

View Full Version : what head settings?


larryfl
02-04-2009, 10:36 AM
hey everyone,

what settings are you using for the adjustable head?

ckoelliker
02-04-2009, 11:41 AM
Mine are the advanced settings as per the manual. The only exception is on the upper most pitch arm. I have it in the third hole instead of the middle.

Jamesppp
02-05-2009, 07:49 PM
I have mine on the intermediate settings everywhere that there are 3 choices. On the places where it says "recommended" in the manual. i used tose settings and where there are 2 choices I used the faster setting unless cautioned not to.

John Cook
02-06-2009, 01:59 PM
I am not a good 3d pilot, I can do the basics of flilpping, rolling, loops, tic tocs(sloppy) and sloppy funnels. Anyway, I'm going with the book recommendations for advanced, but will be putting my expo up at a pretty high rate, and toning down my swash mix for the first few flights. I like my helis pretty fast though :).

aliboy
02-07-2009, 12:35 PM
Something that worked really well for me was to reduce the servo arm spacing to 25mm, as per Charley's recommendation. Made everything a little more calm as I put my swash menus up from the thirties to near 50%. Still getting full movement, but the higher servo resolution makes for much smoother flying.

LITHIUMSTATIC
02-07-2009, 12:42 PM
Basically, their is more than one way to skin a cat.

Foxden
02-07-2009, 09:51 PM
Advanced settings on head in manual

25mm servo horn spacing

300mm flybar

30% expo on Ele and Ail

this setup will "crack, rock & roll"