View Full Version : Where to get 700 Clutch Bell Magnets???
Victor
02-09-2009, 11:41 PM
Hot Start = new Clutch liner needed. I bought a extra Clutch bell just to have a spare but it didn't come with the magnets.
The Clutch Bell Magnets are not listed in the manual's parts section in the back.
Where do you get these magnets from?
Thanks in advance,
Victor
george0079
02-09-2009, 11:47 PM
Have you considered upgrading to the Spektrum Crank Sensor? It works with most all of the popular govs....
You can get replacement magnets from most of the regular on-line shops. Or direct from the gov manufacturers.
Mercuriell
02-10-2009, 04:38 AM
http://www.readyheli.com/Aerospire_Multigov_Sensor_Magnets_p/amg-mag1.htm
WayneBrown
02-10-2009, 06:12 AM
Radio Shack
1/8" magnets work fine.
Victor
02-10-2009, 07:36 AM
Thanks! I got them on order.
Rototerrier
02-10-2009, 07:55 AM
Radio Shack
1/8" magnets work fine.
I have found the 3/16 magnets at RadioShack...but I have never been able to find any that fit the predrilled holes in the bell.
WayneBrown
02-10-2009, 08:03 AM
I have found the 3/16 magnets at RadioShack...but I have never been able to find any that fit the predrilled holes in the bell.
that may well be that particular RS, they are almost all franchises and will stock items that sell and drop the ones that don't.
However a quick search revealed they are no longer on the website either..
Rototerrier
02-10-2009, 08:05 AM
that may well be that particular RS, they are almost all franchises and will stock items that sell and drop the ones that don't.
However a quick search revealed they are no longer on the website either..
I only knew because a buddy of mine used the larger magnets and was fortunate to have some jewlers drill bits which allowed him to perfectly ream out the existing holes. I don't have the time or patience for that stuff and have to wait for the aerospires to arrive in the mail.
rcmarty
02-11-2009, 06:02 PM
i used an eagle tree magnet (smaller) and incased it in epoxy.
100+ flights on my 600n / gv1
Martin :)