Trex XL HDE Build Videos will be here!

[mmota]

Thanks Kgfly and Bob. I hope to learn a lot with them !!

[mmota]

Hi guys,

Please, do you have some pictures where I can see the best place to install the ESC and the receiver ?? In my T-Rex 450 HDE, the receiver is above the battery (with velcro) but I'm not comfortable with this position because I need to remove the receiver every time that a change the battery. My ESC is installed below the main frame near the motor.

Thanks

[Finless]

Do it just like you see the SE but put the ESC on the side up front alonf side the motor.

See early pictures in my gallery.

Bob

[mmota]

Hi Bob.

I am really learning a lot with your videos but I have a doubt about the flybar rod. The length of flybar rod that come with the kit is 22mm and I bought another one, for replace it and I notice that your length is about 19mm. I also noticed that there was a correction in my HDE manual regarding the length of each side between the flybar paddle and the flybar control set. I downloaded the XL manual in the web and in this manual this distance is 63mm. In my manual (they put a label with new value) this length is about 84.4mm. My doubt is: Can I use this smaller one ?? and in this case, can I use also the flybar weights in each side ?? If I do this, will I feel some different behavior in his flight?

Thanks again

[Slåttevik]

Gary,

Glad you found archeli. Yup, Bob's videos are a marvelous resource that have helped me (and hundreds of other folk) a lot.

Be sure to watch the full set, even for the heli's that you don't own, since you will pick up all kinds of useful hints and develop a greater understanding of the differences and similarities between helis.

If yours is a 450XL(CDE) then watch Bob's SE build videos from here:
http://www.helifreak.com//viewtopic.php?t=12455

Beware, you're gonna get hooked :wink:


Why cant I open this file : http://www.helifreak.com//viewtopic.php?t=12455

[Finless]

That is not a file it is a link to a THREAD on helifreak that no longer works.
If you want to see this thread here is the new URL
http://www.helifreak.com/showthread.php?t=11373

Bob

[heniochus]

Hi Bob,

Where are these XL videos? I was watching them one day and they disappeared the next. Now I wished I downloaded them onto my hard-drive. Thanks a bunch.

-Ken

That is not a file it is a link to a THREAD on helifreak that no longer works.
If you want to see this thread here is the new URL
http://www.helifreak.com/showthread.php?t=11373

Bob

HDE Build Overview
Trex XL HDE Kit and Tools Overview (10 Megs) (http://video.helifreak.com/?filename=hde_overview.wmv)

HDE Build Steps 1 through 3 - Head and Seesaw
Trex XL HDE Steps 1 through 3 (24 Megs) (http://video.helifreak.com/?filename=hde_steps1to3.wmv)

HDE Build Step 4 - Flybar cage and Flybar
Trex XL HDE Step 4 (24 Megs) (http://video.helifreak.com/?filename=hde_step4.wmv)

HDE Build Steps 5 through 8 - Washout, Swash, and Head
Trex XL HDE Steps 5 through 8 (24 Megs) (http://video.helifreak.com/?filename=hde_steps5to8.wmv)

HDE Build Steps 9 & 10 - Main Gear and Landing Gear
Trex XL HDE Steps 9 and 10 (12 Megs) (http://video.helifreak.com/?filename=hde_steps9to10.wmv)

HDE Build - Installing the Motor and Adjusting the Pinion
Trex XL HDE the moter and adjusting the pinion (24 Megs) (http://video.helifreak.com/?filename=hde_motor_pinion.wmv)

[Finless]

I dont know where you got thos links but theyu are OLD... go to the FIRST post in this thread and you will see the list and those links work.

Bob

[heniochus]

I dont know where you got thos links but theyu are OLD... go to the FIRST post in this thread and you will see the list and those links work.

Bob
Thanks, Bob. Got them all downloaded this time. Sorry, I think it was my mistake. I was probably clicking on someone's repy page instead of your original links from the very 1st page.
-Ken

[toms2006]

Hey Guys,

Happy New Year! I Just finished Building a T-Rex 450 HDE from a Kit (well kinda!). Anyway, due to the snow and cold outside, I hovered in my living room and all seems well. The only problem I see is a balance problem but I am working on fixing that. Any pictures that you have of where to mount the ESC, Reciever and Gyro for balancing out the weight of 21mAh 15C LiPo pack would be greatly appreciated.

Tom

[airanamation12]

hi ,im new at this hobby i need instrucctions on how to set up the trex 450 se v3 helicopter,. need to no how to build the kit i purchase and how to set up the servos gyro , please help me thank u my email addres is [ airanamation12@yahoo.com ],. thank u:arggg:

[Plane Hazza]

What is the best servo arm for an HS65MG on the aileron? I've got the two armed part, so the links are 90 deg to the arms. Should I use that or a smaller one?