PDA

View Full Version : Just switched from futaba to dx7SE. Gyro help


johnnychimpo
02-13-2009, 07:13 PM
%I got everything running. Auto sense gyro mode. Normal and stunt is set to 70% (aka 30% gain?). Anything higher and my tail wags. is this a normal setting for everyone? Am i correct in understanding anything under 50% is rate mode and above 50% is HH mode?

I have Gear/ Gyro and Aux2/ Inh. Using an AR6100 receiver.

snjbird
02-13-2009, 08:41 PM
Jonny, Run your Gyro on gear chanl and adjust your gain in the travle adjust?

mrivers
02-13-2009, 11:41 PM
%I got everything running. Auto sense gyro mode. Normal and stunt is set to 70% (aka 30% gain?). Anything higher and my tail wags. is this a normal setting for everyone? Am i correct in understanding anything under 50% is rate mode and above 50% is HH mode?

I have Gear/ Gyro and Aux2/ Inh. Using an AR6100 receiver.

Yes, under 50 is rate, over 50 is HH. (so long as that channel is not reversed).

70% would equal 40%, the value doesn't matter, only that the gyro performs as expected.

( 70 - 50 ) * 2 = 40

Edit - just noticed you have the DX7SE, and not the DX7, however the Gyro sense menu sounds the same based on your description.

johnnychimpo
02-13-2009, 11:46 PM
thanks. new to this whole spektrum thing. The SE is exactly the same as the dx7 manual. Actually, they gave me a DX7 manual in the box with a SE flyer.