BLAZE86DUBZ
02-14-2009, 11:09 PM
does anyone use a 401 with a dx7 what are you using for a gain i have mine at 35 %and i am getting tail wag
kyalamikid
02-15-2009, 01:39 AM
Are using using with gear switch or through GyroSense menu?
What servo are you using?
Is the 35% the actual number on your DX7?
If so you are in Rates mode not Heading hold.
Try running 70% and move up and down from there.
Have you read through the threads on the 250's tail issues?
Have you tried moving the tail servo rod manually at 70% throttle with no main blades on to check for binding?