View Full Version : One piece dammpers
Wesley_G
05-29-2006, 04:51 PM
I have a set of one piece dampers coming in just want to know the best
shims combo to use for hard 3D.
angelob
05-29-2006, 06:22 PM
The one-piece dampeners come with shims - you only use one per side.
Angelo
ChrisLaFollette
05-29-2006, 06:23 PM
Shims that come with it. Turn the flat side so it faces the c-clips.
Wesley_G
05-29-2006, 06:56 PM
Thanks
DavidH
05-30-2006, 09:39 AM
Turn the flat side so it faces the c-clips.
Hmmmm? The shims that come with one piece dampeners, they are flat on both sides.
The shims are just regular 1 mm shims. At least the two sets I have new in the package that is what the shims are.
David
heliroller
05-30-2006, 09:44 AM
He may be talking about the dampners.
DavidH
05-30-2006, 09:52 AM
Well the way I read it. He is talking about the shims. If he meant flat side of dampeners that is what he should have said.
David
heliroller
05-30-2006, 10:26 AM
Tis true!
ChrisLaFollette
05-30-2006, 12:08 PM
One side of the shims are flat and the other is kinda roundish, I was just saying to install them so the round/smooth side is torward the dampeners.
DavidH
05-30-2006, 12:14 PM
Well they must have the wrong shims in the two new packages I have then. The shims in these packages are flat on both sides and look the same. They are the same 1mm shims I have in my parts box from before the one piece dampeners were produced.
David
929pilot
05-30-2006, 12:24 PM
Can anyone give me a part # for these dampeners, I want to try a set but can't find them.
ChrisLaFollette
05-30-2006, 12:34 PM
Must be. The shims I have are flat and have roughish edges on them and the other side is round and smooth so I put that side against the rubber so it doesnt get torn up as fast in flight. Mine are DEFINATELY different on each side.
angelob
05-30-2006, 02:13 PM
Can anyone give me a part # for these dampeners
0844-12
929pilot
05-30-2006, 02:15 PM
Thanks!
Peter
05-30-2006, 06:02 PM
part no is 0844-12 .....
they are great .. :D :D