View Full Version : Im the first!!!....NEENER NEENER
BigVanVader
06-11-2004, 07:59 PM
Again,Someone had to do it....so here it is....first post in a new forum.....Charles if you read this could you find out for me what the plane was that HC borrowed so much in chatti and where i might be able to purchase one of those lil 3D badboys?...any input from anyone that knows would be appreciated
WillJames
06-11-2004, 08:23 PM
ShockFlyer???
Hotshot Charlie
06-12-2004, 01:52 AM
I have a 3DX on the table, hope to get it flyin' in the next week or so. A lot of the local heli fly'ers are having fun with the "blue foamy's" !!
ThBrtmn
06-18-2004, 11:45 PM
Was it those reall soft foam ones like charles has where the fuse velcros around the elecs...?
bighands3d
06-19-2004, 02:00 AM
my new on will be here hopfully tommorow from 3Dfoamy.com got me a G202
gona put my shock flyer goodies on it with 11.1v packs
Hotshot Charlie
06-19-2004, 08:04 AM
The 3DX (if your not familiar) is from FoamyFactory.
http://www.foamyfactory.com/index.htm
It is just a blue fan foam cutout. Here is a photo of mine.
big-al
06-19-2004, 10:26 PM
Big,
charles had a plane the same as this one.
http://www.funplanes.com/
look at the SX-2 kit
its the same design as the ones they were flying but its a little cheaper kit. you can also get an edge 540 or a yak design as well. I've got a few of the SX-2s coming for myself and the local guys. the preferred setup for this bird is the following:
Axi 2212/34 motor with mount adapter
castle phoenix 25
etec 1200mah 3s lithiums
apc 11X4.7 prop
for the record I had the blue extra 300 that was there. I also was the idiot goaded into a second attempt at looping thru the power lines. always quit when you're ahead! :arggg: