Revolution whip antenna position

[peter84]

Seeking suggestions, ideally pictures, of where and how best to fit a Revolution whip antenna to my Bergen standard gasser. I am using Futaba digital servos in the stock positions, a GY401 mounted on the gyro plate and a TJ mounted on the 45 degree plate below the gyro plate.
Safe flying, Peter

[Rodney]

Peter I dont fly Bergen, but I do know that there lower canopy standoff has a nice hole in it. When you tighten the standoff down keep that hole facing to the nose of the heli. Use a 2mm bolt thru it and into the hole in the revolution ant.

[BobbySmith]

Yup should work perfect there