Post picture of 500N

[Gernejr]

I know only a few have the conversion done but could you post some pictures with & without canopy both sides? Thanks

[BenHeli]

Here are a few pictures taken my one of the test pilots.

[Gernejr]

Thanks Ben looks GREAT. If the background with the head removed is your back yard life is B. U. T. Ful..:thumbup:

[BenHeli]

Thanks Ben looks GREAT. If the background with the head removed is your back yard life is B. U. T. Ful..:thumbup:

I can't complaint ;).

[billbill242000]

What is the hole in the very top of the canopy for? Cooling?

[Gernejr]

Starter shaft so you can start without removing canopy.

[billbill242000]

DUH!!! I guess I should think before posting:P

[WillJames]

Got my kit today. :)

http://www.helifreak.com/attachment.php?attachmentid=91728&stc=1&d=1239739438

[crash-alot]

Come on guys, post those pictures!!:)

[jrumer]

Hey guys how does it fly ? I am interested in this kit :lol:

[george0079]

here's a couple

[Gernejr]

Hi George Looks Great ...Could you show some more pictures with the canopy off like to see you placement of align 2 in 1 and battery as it looks like you have it under the canopy somehow. Thanks

[george0079]

The 2in1, and Throttle Jockey are directly under the main gear. The flight battery is velcro'd inside the canopy.

Balance is perfect with 1/2 tank of fuel:thumbup:

I took the stock battery mount from the kit, trimmed it down, and mounted it above the boom block, for a RX mount. And then, used the space under that to store the extra wires. worked perfect, and much cleaner than the other options available

[Gernejr]

WOW she going to be badase.. Only got 2 tanks hovering before breaking the tail belt (150 flight).. Just ordered a TT kit.:thumbup: Here's a few pictures .. (..@25lb)

[Gernejr]

he zippy 2s 1300 fits inside the frame but is a a liittle work putting in and out . Did balance out nie with half tank of fuel. Anyone know why i keep breaking Guide for the tail ? this hhappen before the kit was installed and is not the first time. I also added a bolt to the t=remote glo that i tap into the motor mount for a ground .

[BenHeli]

he zippy 2s 1300 fits inside the frame but is a a liittle work putting in and out . Did balance out nie with half tank of fuel. Anyone know why i keep breaking Guide for the tail ? this hhappen before the kit was installed and is not the first time. I also added a bolt to the t=remote glo that i tap into the motor mount for a ground .

Very nice Glenn. I too had problem with the tail guide, both on the 500E and 500N until I switched over to the tail guide designed by none other than Eduardo, the designer of the 500N. They are available at RCDepot or flyhelirus.

[rcdepothobbies]

Very nice Glenn. I too had problem with the tail guide, both on the 500E and 500N until I switched over to the tail guide designed by none other than Eduardo, the designer of the 500N. They are available at RCDepot or flyhelirus.

Please check out this: :thumbup:
http://www.flyhelirus.com/servlet/the-1566/RCDN500TCG-Tail-Control-Guide/Detail

[rcdepothobbies]

Here's some pictures of mine...

[BenHeli]

That heli is way too clean for being a nitro. Go fly young man! :YeaBaby:

[Gernejr]

That heli is way too clean for being a nitro. Go fly young man! :YeaBaby:

I know your not talking to me :YeaBaby: That was after 2 tanks on the rich side (breakin). It going to burn some fuel this weekend...:thumbup:

[crash-alot]

I've finished the built this morning after a marathon session.
Things to do:

Install Align DS620 for tail servo.
Replace Hitec HS82 throttle servo with Futaba S9560
Lean out engine. Excessive some/oil covered skidds, battery and frame!

Maybe I should get al longer muffler deflector??

Fit governor and hunt the tail drift!

Here is some pre-maiden photos. Note that since the photos I've moved the pressure nipple to the top of the Mavrikk muffler.

Jaco

[WillJames]

Here is my album with some of the build pics. Gotta get some good weather and get to the field.

http://helifreak.com/album.php?albumid=2571