most potent 3D combo

[buster1]

Guys, I am planning on using the following in the Lepton,
1. Motor - Hyperian
2. Battery - HYPERION LITESTORM VX3700-4S (14.8 VOLT) LIPOLY PACK
3. ESC - Align 75 amp

Question - I am looking for an aggressive 3D setup - this has been recommended to me by the store I am buying from - but I know this heli. is new and the setup data is just coming in.

What are you opinions - finless bob, was do you think? Before I got out and buy these batteries, any suggestions - I hear some guys are thinking 5S

I am hoping that with the setup listed above, I can get 6 minutes of strong 3D

Any help would be appreciated,
JH

[Finless]

You got what I am going to be using for 4S :)
Exact same setup for 4s and batts......

I think it will be good but really I wont know until I get there!

Bob

[rchover]

that's what I'm going to start with too, but there is pleanty of motor combos to experiment with , I do want to try a 5s 3700 mha setup with the same motor / smaller gear or a lower kv and same gearing ... should be KILLER

I also already have a range of medusa
028-056-900/1400/1900kv's motors that I'm going to try out with 4s and 5s ..I do have a good selection of 1/8th inch bore pinions for the medusa's from 12t up to 24t ...it will be interesting to see if a small pinioned motor can fit in the lepton ...we shall see soon... :roll: ...

you gotta love a new toy!!

[supertrex2]

The Medusa 3400 will work with Lepton?

Hope they make one for Trex600

[buster1]

Jeremy, its Jeff from NY - when or have you tried the 5S setup - please let us know what you come up with,
Jeff