PDA

View Full Version : Avant clutch Bell play


Eric Brandenburg
06-23-2006, 05:43 PM
Hi guys, I have a few MM's of play in my avants clutch bell, is that normal, or is there something wrong on mine?

mevigavant
06-24-2006, 01:24 AM
you mean up and down play? if so, you're probably missing the small o-ring and brass washer that go on the clutch shaft underneath the clutch bell.

Jafa
06-24-2006, 07:33 AM
Yeah, I would assume you mean vertical play, washer and o-ring

When new the bell to clutch shoe fitting should be 0.4mm gap
so lateral play of the bell should not be that much
(and when the clutch shoes bites the bell is locked up anyway)

Eric Brandenburg
06-24-2006, 08:42 PM
Ok thanks guys, what does the assembly look like with the oring and washer on it, I got mine used.

mevigavant
06-25-2006, 01:33 AM
It has an o-ring and brass washer on the clutch shaft. If you go to augustoheli.com and go to the parts page you will see it in the x-spec or freya manual.

Eric Brandenburg
06-25-2006, 11:21 AM
Ok thanks guys, this forum is awesome. :glasses2: