spektrum DSP75 servos

[lilwillywilly]

decided to go with the spektrum dx6i radio set-up for my 250. also been reading about wich servos i should get (really reading about everything).

Anyway, what do you guys think about using the spektrum dsp75 servos for my 250, gonna use them for everything now, but do plan on atleast upgrading the tail servo down the road. im somewhat on a budget right now, and figure since the radio comes with them, i can save a few $$$ now and use them.

heres some specs from spektrum's website.


7.5 Gram Super Sub-Micro Digital Prog Servo Product Specifications
http://www.spektrumrc.com/Images/px-clear.gif http://www.spektrumrc.com/Images/px-clear.gif Size Category: Minis and Micros http://www.spektrumrc.com/Images/px-clear.gif Type: Digital http://www.spektrumrc.com/Images/px-clear.gif Torque: 19.0 oz/in @ 4.8v http://www.spektrumrc.com/Images/px-clear.gif Speed: .11 sec/60° @ 4.8v http://www.spektrumrc.com/Images/px-clear.gif Dimensions (WxLxH): .90 x .45 x .94 in (23 x 12 x 24mm) http://www.spektrumrc.com/Images/px-clear.gif Weight: .26 oz (7.5 g) http://www.spektrumrc.com/Images/px-clear.gif Bushing Or Bearing: Bushing http://www.spektrumrc.com/Images/px-clear.gif Motor Type: Coreless http://www.spektrumrc.com/Images/px-clear.gif Connector Type: Universal http://www.spektrumrc.com/Images/px-clear.gif Gear Type: Nylon

[helidude3]

hmmm, if you plan to do any 3D, i would not recommend them because they would most likely strip in the air. Although, if you are only doing pattern flying + circuits, then they would probably work fine.

[lilwillywilly]

no 3D for me anytime soon, hovering, small circuits, figure 8's, learning inverted, stuff like that.

Oh, and crashing :bomb:

[cb3d]

Those will work fine for basic flying. I still fly them in my CP Pro which is hardly stock at all anymore. But I would upgrade as soon as you can afford to for sure. The hs 65 arent much more but a much better servo. And you can upgrade to metal gear when money allows.