cannot adjust " - gear"

[lilwillywilly]

picked up a dx7 today for my 250. got the jist of everything, and most set-up whent fairly easy, however, i cannot adjust all of my endpoints, when i scroll through them, it seems like i can only adjust 1 per chaannel. for example, like the title says, i can adjust my + endpoinnt for gear, but cannot adjust the - offf of 100%, am i missing something, kind of having trouble setting up the gyro because of this.

[MXRACERX43]

Highlight the number then flick the gear switch.

[lilwillywilly]

Highlight the number then flick the gear switch.


playing with it right now, doesnt work.

[MXRACERX43]

give me a second I will go grab mine.

[lilwillywilly]

This is some f**ked up s**t. 315$ for a radio, and so far one of the jr ds285 servos that came with it had a broke gear, and now the gear switch dont work.....

dude this is messed up.... needless to say im pissed. f*ing rediculous.

[lilwillywilly]

And the hobbyshop i got it from is closed on sundays. :mad:

[MXRACERX43]

+Go into your switch assign menu, assign gear to gear. No when you flick the gear switch it will change. I find it easier to use the Gyro sense menu rather than the gear channel. Some people have told me it is more accurate to us the gear ch though.

[lilwillywilly]

with gear set to gyro it will not change then correct? let me finish putting the screws back in it (was pulling the back off ot see if the switch wasnt hooked up something). i'll try that in a min.

thnx.

still doesnt fix the broke servo gear :(

[lilwillywilly]

I love you man, setting up my lil 250 has been a pain, to say the least, thought my radio was broke. you saved the day. :noteworthy

[MXRACERX43]

With gear assigned to gyro sense, no it won't change. You can set 3 different gain values with the gyro sense page. I don't like flipping any switches other than FM and TH so using the Gear switch is useless to me.

Sucks about the servo your LHS should replace it for you, if not contact Horizion I'm sure they will.

[Bob O]

willy,

You mentioned about only being able to adjust one end-point per channel. When you're in the travel adjust menu, you scroll through the different channels with the select button. When you're at the Rudder channel for example, there will be a small arrow/triangle next to the rudder in one direction. If it lets you adjust the value in one direction, all you have to do to adjust the value for the other direction is move the rudder stick slightly in that direction and hold it there while adjusting the value. It works that way for all the channels.

Good luck!

[lilwillywilly]

When you're at the Rudder channel for example, there will be a small arrow/triangle next to the rudder in one direction. If it lets you adjust the value in one direction, all you have to do to adjust the value for the other direction is move the rudder stick slightly in that direction and hold it there while adjusting the value. It works that way for all the channels.
Good luck!


that was why i thought my gear switch was broke, doing the above worked for every channel except gear, because i had gear set for gyro.

all is figured out now, with your guys great help.