View Full Version : Pitch & Throttle Sceadu Evo 50
jack2k
06-30-2006, 02:21 AM
Hi all
Can someone tell me right setup of Pitch & Throttle w/out governor in normal and idle-up for my Sceadu 50 Evo + Os 50 Hyper ??
thx, jack
SteveL
06-30-2006, 09:07 AM
Buy a gov!
You are probably going to find you need about 35% throttle wit 0 pitch and ~ 70 with full + - 10 pitch I run a flat curve on the pict and just limit the top and bottm in normal. In idle up I rub a flat line fro -10 to +10.
I have run them without gov but it is a PIA and you loose some of the benifit of the hyper.
rob_jones
06-30-2006, 10:21 AM
I run my pitch at -11, -5, 0, +5, +11 in all modes, except HOLD. There I have +12. This is with a Hyper 50/MPII/30% Cool Power.
Throttle is more or less a straight "curve" from 0% - 100% in NORMAL, and 100% - 45% - 100% in STUNT 1 and STUNT 2. Both STUNT 1 & 2 are identical curves. S1 is GOVERNOR OFF and S2 is GOVERNOR ON. I fly in S1 to check engine tuning and then switch into S2 and leave it there.
I don't find the Sceadu to be overpowered with the Hyper 50 combo listed. It has good power, but I don't think it'd be a lot of fun at 70% throttle. At least not for a ham-fisted stick banger like me! :mrgreen:
jack2k
06-30-2006, 10:37 AM
Thank u guys for ur answers
I'll try setting my sceadu in this way ;)
Take care and have good flyghts ( better if reverse ) :glasses2:
Jack