Help for my Head

[Mrdeadair]

I originally posted this in the 700 finless build thread but I figure I would put in here as well.


So I just finished my build and I am going though the finless set-up of the head, and electronics. Per Bob's suggestions on setting up the swash mix so the washout block almost touches the head block the swash mix comes out to 38% is this right? All the links were pretty long when built per the manual so they need to be tightened to get the head right. Please keep in mind I went through the head at mid stick and all the linkage are straight ie washout arms seesaw arms and blade grip arms. Thanks in advance for any help.

[caseyjholmes]

Yeah, mine's about 32 with Futaba so you're up on me some. I am a hair or two in from max though as I try to eliminate all possible binding even at corner stick.

I seem to be getting +-11* of pitch and 7* of cyclic without binding in any stick corners when rotating the head. Feels good like that if you ask me. I've never required lightning fast cyclic to get the job done.

[Mrdeadair]

Thanks it just seems low to me.