View Full Version : Kalt space baron help
Streetluge Chris
06-02-2009, 02:58 PM
Can anyone help with info on setting up a tail rotor on a kalt space baron.At the moment I am having to put loads of left input to keep it straight and its fighting that realy hard.
-Gamah
06-02-2009, 04:21 PM
What gryo are you running? And how much gain?
Slyster
06-02-2009, 04:33 PM
What the heck is a Space Baron? Never heard of it. (sorry to not be able to help but curious)
I assume your using the period correct rate mode gyro, you'll have to setup your revo mix correctly.
Streetluge Chris
06-02-2009, 05:05 PM
Its csm 180 gyro is there a standed set up for the linkage.
Streetluge Chris
06-02-2009, 05:08 PM
http://www.iroquois.free-online.co.uk/sbup.htm Have a look at this from 1991.
Finless
06-02-2009, 06:53 PM
As far as I know KALT has not made a heli in over 10 years?
Bob
Streetluge Chris
06-03-2009, 04:03 AM
Yes I know its a bit of an old one i just need a guide on how to set the tail should everthing be at 90deg should it sit centre of tail slider etc.
Thanks
AltecLansing
06-28-2009, 10:02 AM
Actually, the slider won't be at the center of the tail output shaft. You will have to mechanically set up the tail at hover to be centered with no input in a head wind. Also, head speed is important on the zr. A low head speed will cause poor tail authority. Once the heli is set up for a stable hover you will need to adjust revo mixing in the radio for when you give it more throttle. My best suggestion is to get a heading hold gyro like a 401 or better and setting that up in rate mode for the stable hover, then fly it in heading hold mode as it will be much more enjoyable to fly that way. I have 4 flyable zrs and about 8 or 9 more lying around in various conditions of repair along with a lot of new in bag parts.
oy2503
05-26-2010, 12:32 PM
Guys,
Kalt Space Baron S is the same as the Kalt Enforcer ZR.
BTW, I have a complete, dismantled and dusty one.
If anyone should be interested - but it's in Denmark.
I bought it in the US, and it wasn't as nice as the seller claimed,
so I never built it. I bought a few spares, though.
Cheers
Erik
atkinson
06-01-2010, 08:00 PM
How about a sky Baron? I have one that is 100%-minus a clutch. I belive it is from the 80's and has 80's top of the line equipment. Anyone know of a similarity like the ZR and the space Baron?:confused: