VA_Rex
07-09-2006, 07:41 PM
Blade CP BLOWOUT
Holy cow, I have a lot of stuff for the Blade CP. I’ll sell it all for $150, but I’m willing to part it out in the following packages.
Prices and condition are as listed. All prices include shipping and Paypal fees.
PM me with any questions or offers. Thanks.
PayPal only. Shipping to CONUS only.
EVERYTHING LISTED $150:
-OR-
AIRFRAME PACKAGE $100
USED, VERY USED, I flew the crap out of it, but it flies pretty well. The tailboom has been glued in like 10 times, but it works. The GWS tail fin housing is cracked.
NO CANOPY (actually it exists, just really shabby).
Includes:
4in1 (used, drilled for cooling)
Servos (used)
DD tail upgrade w/ heatsink (used)
BH upgrade (used)
9T motor w/ HS (used)
E-Flite Flat Bottom Blades (new),
Electrifly 11.1 1250mah Lipo, NO LIPO CHARGER
Radio (used)
SPARES (included with AIRFRAME PACKAGE)
Bell Mixer Arm and Push Rod (NIP)
Paddle control frames (1, new?)
Original Blade Grips (used)
Original tail Gear and shaft (used)
Original tail Props (2, new, good condition)
Paddle Control Pushrods (used)
Bearing (1, new)
Spindles (used)
Training Gear E-Flite Tail HS. (used)
E-Flite 9.6V 650mAh NiMH battery (2, used) and charger.
Original box and instructions
BLADES:
E-Flite Carbons (Used, great condition) $20
E-Flite Symmetrical Blades (opened, but NIP) $10
PlastiBlades (used, good condition) $10
HD Flat Bottom blades (opened, but NIP) $10
MOTORS: $10
E-Flite Main motor heat sink (used)
E-Flite 8T Motor (used, good condition)
E-Flite 10T Motor (used, original stock motor)
E-Flite Tail HS. (used)
GWS DD Tail Upgrade: $15
GWS tail motor w/ 2 orange props (opened, but NIP)
GWS Tail Prop and extra shaft (NIP)
GWS Tail Fin Housing 2 (NIP)
Holy cow, I have a lot of stuff for the Blade CP. I’ll sell it all for $150, but I’m willing to part it out in the following packages.
Prices and condition are as listed. All prices include shipping and Paypal fees.
PM me with any questions or offers. Thanks.
PayPal only. Shipping to CONUS only.
EVERYTHING LISTED $150:
-OR-
AIRFRAME PACKAGE $100
USED, VERY USED, I flew the crap out of it, but it flies pretty well. The tailboom has been glued in like 10 times, but it works. The GWS tail fin housing is cracked.
NO CANOPY (actually it exists, just really shabby).
Includes:
4in1 (used, drilled for cooling)
Servos (used)
DD tail upgrade w/ heatsink (used)
BH upgrade (used)
9T motor w/ HS (used)
E-Flite Flat Bottom Blades (new),
Electrifly 11.1 1250mah Lipo, NO LIPO CHARGER
Radio (used)
SPARES (included with AIRFRAME PACKAGE)
Bell Mixer Arm and Push Rod (NIP)
Paddle control frames (1, new?)
Original Blade Grips (used)
Original tail Gear and shaft (used)
Original tail Props (2, new, good condition)
Paddle Control Pushrods (used)
Bearing (1, new)
Spindles (used)
Training Gear E-Flite Tail HS. (used)
E-Flite 9.6V 650mAh NiMH battery (2, used) and charger.
Original box and instructions
BLADES:
E-Flite Carbons (Used, great condition) $20
E-Flite Symmetrical Blades (opened, but NIP) $10
PlastiBlades (used, good condition) $10
HD Flat Bottom blades (opened, but NIP) $10
MOTORS: $10
E-Flite Main motor heat sink (used)
E-Flite 8T Motor (used, good condition)
E-Flite 10T Motor (used, original stock motor)
E-Flite Tail HS. (used)
GWS DD Tail Upgrade: $15
GWS tail motor w/ 2 orange props (opened, but NIP)
GWS Tail Prop and extra shaft (NIP)
GWS Tail Fin Housing 2 (NIP)