9303 2.4ghz and spartan gain adj

[clfryer]

hi there anyone running a 9303 and spartan ds760,i have the following prob
im using my rudder dual rate switch as rate mode toggle but the values i put in for gain adj dont match up with the spartan editor diag values however if i adj the travel adj values for gain channel it comes up same as editor screen. my dual rate values were
45%in position 0, and 45%in position 1(rudder dual rate screen) however the editor screen said 86% in avcs and 71 in rate mode,so why isnt my remote gain changing the values only can with travel adjustment menu for gain(gear channel)

lee:arggg:

[Lplate]

Maybe your D/R setting is not for the gyro gain but for the rudder EPA/Travel Adjust (piro rate)? I don't own your radio. Using DX6i only so don't know much more. Just thought of that possibility.

[marchambault]

I'm using the same setup as you are on my T500.

I'll have to boot up my RC laptop but isn't the gain displayed in the Spartan program different than the one you would configure from the radio?

I have my gyro gain setup on the rudder d/r switch as well. 70 and 30.