Raptor 60 + OS70 What blades???

[Turbo Boss]

Raptor 60 + OS70 What blades??? Weight, size???

Can I use this ones???

http://www6.mailordercentral.com/heliproz/prodinfo.asp?number=802145&variation=&aitem=9&mitem=19

[Matthew]

Link isn't working. Get a set of the Thunder Tiger Black and white blades. The are relatively inexpensive and fly nice. If you want a better blade go with the 690 V-blade they are nice you just have to manage the pitch allot closer.

[bighands3d]

For the money the TT Carbon blades fly pretty good. If you want a good performace blade get a set of 690 MAH'S OR 700's IF you want a set of V's I have a set of V2's for $100.

[Turbo Boss]

Link isn't working.

http://www6.mailordercentral.com/heliproz/prodinfo.asp?number=802145&variation=&aitem=9&mitem=19

[Matthew]

Turbo

I would go with the white and black CF from TT. I've heard some problems out of the maverick blades in that they don't track well sometimes on the Raptor. Or take bighands up on those V-blades. They are nice.

[Turbo Boss]

Turbo

I would go with the white and black CF from TT..

Can you give me the part number or a link were I can see does TT blades?

THX

Isaac

[Matthew]

Part # TTR3836 and link to onlyraptors . But check all the people around that sell blades you might find them a little cheaper. http://www.onlyraptors.com/parts/moreinfo/TTR3836.php

[Sar]

I think you will definetly like the TT black/white blades. I've been running the 680s (replaced em several times) and I've not had a bad set yet, there were some mumbling about a defective pair here and there, but overall pretty minimal.

I didn't know you could run 690's on an R60 without the extended boom?

[Matthew]

Yep you can put them on there. That is what I like to run. Just don't let the tail blades go over 95mm or you my get a strike.

Matthew

[megarckid]

hey matthew im flying the tt on mine and love them and the price is good on them ...but if money is good i would go with the vblades :mrgreen:


c-ya