DSX9 copy to DSX9 and any alternative software / usb cables available?

[marcgode]

I'm trying to copy my models from my JR MacGregor DSX9 to a DSX9 limited edition ( with backlight ) from Flying Hobby. When I do so its says transmitter mismatch and doesn't copy. Anybody knows about this issue? Maybe I have to transfer to my PC and back but don't feel like buying the cable just for this. Anybody experience with using another cable or has software for this?

thnx marc

[Pinecone]

When I transferred from my XP9303 to my X9303 I had to use a stereo cable, not a mono cable like the instuctions say.

[marcgode]

Yes thats what I did Pinecone,I used a stereo cable, but a DSX9 is somehow not compatible with a DSX9 from Macgregor , great :-(

[Pinecone]

NOT good.

Iguess yo uwill have to buy the software/cable and copy them that way.

[marcgode]

Unbelievable not :-( Is there nobody that has that software and knows it also works with another usb cable?

thnx

[theaton56]

Thats because the hardware configuration for the DSX9LE is probably NOT the same as the standard DSX9. Therefore the CPU recognises that there is a difference and will not allow a copy.

What are the 2 NET codes on the 2 systems ?

[theaton56]

Quick question.... does the LE version allow for Stick Mode change or is it fixed ?

[marcgode]

yes both allow stick mode change only the us 9303 is not so easy to change ( although I did that as well ,changing a jumper and entered the service menu )

This is the software on both versions:

software DSX9 Mac Gregor: mdl:07 2,4GV100-07I10
software DSX9 Hong Kong LE: mdl:07 LiD2V100-09A07

which one is newer ? any difference found ( I see none in the menu )

[theaton56]

The LE firmware will be the latest. There hasn't been any firmware changes in the standard DSX9. The LE has to have different firmware so as to allow for the timing of the backlight.