Blade Cp Over Responsive Tail

[nvr2low20]

I was just wondering if anybody else has this problem and maybe some ideas. My blade cp has a way over responsive tail even a slight movement in stick control and it swings right around and super fast just curious if there is a way to make it slower. Thanks for any input in this matter

[zooland1]

Does it do it all the time? Mine has done it a few times and if I reinitialize the 4-in-1 it usually corrects itself. You probably already know this but I'll say it anyway. Don't move the heli in any way while it's initializing. It sets the gyro during that time. If restting doesn't help, you might be losing your gyro.

[nvr2low20]

Yah it does it all the time, do you think i could have got a faulty gyro because it has done this since new,and it maybe has 3 hrs on it.

[zooland1]

I would contact Horizon. It sounds like a defective 4-in-1 to me. I had mine for over six months before it started.

[nvr2low20]

I wish i could see another cp and how fast it turns and gudge from there, because i also own the CX and from left to right doesnt spin very fast but the CP wow slight movement and its turned all the way around before you can blink but like i said i dont know any better, just from watching some of the videos of bigger helis and they dont turn nearly as fast as this. do you know anywhere a video of just maybe normal flight with the cp and then maybe see for my self, then i could go and get another 4 in 1 .
thanks again to anyone who is giving advice..

[kenandmoose2]

judging the cp from the cx is like judging a 79 honda to an 06 honda. the two are totally different

[Riley Roo]

I think you are used to the CX. Just keep flying the CP and the CX will feel to slow.

[SteveTTL]

I had the same problem with my cp at first. On mine, if when initializing I leave it undisturbed for 30 more seconds after the light stops blinking, it then works correctly. I think Rick Rotorhead discovered the same solution with his cp clone. It's worth a try. I also agree with Riley Roo, you might just be used to the cx.

[Rick Rotorhead]

You can yaw a BCP 180 deg in about 1 second, easy. Of course it spins a bit easier one way than the other. Yeah, confirming SteveTTL - leave the heli alone until you've had a steady green light on for at least 20 secs AND ideally it should be flat and level while initialising the gyro. It all helps!