PDA

View Full Version : Rotorworkz G4 servo link length?


copperkiid
08-01-2006, 04:50 PM
Iím working on putting together my Rotorworkz G4 frame. What length (from end to end of the link) should the links between the servo arms and the swash be? Thanks

ormandj
08-01-2006, 05:24 PM
Whatever length they need to be to get your swash movement correct. At bottom of left stick, swash should be about as low as it can go without binding with cyclic. Watch finless's videos on CCPM. It'll apply to that frame too! :)

copperkiid
08-03-2006, 11:47 PM
Any other recommendations. Thanks