dunbare
08-02-2006, 10:08 PM
I just purchased the new flybar control arm for my Stinger 50 and as I try to attach it to the fulcrum, it's a very tight fight. Tight enough to the point that it does not rotate very freely. is this normal and will wear in, or do I need to talk to David about it and have another sent out.
flyinfool
08-03-2006, 09:30 AM
Mine was tight to where I had to spring it out a little but there was no binding.
Check to be sure that you did not accidentally get some Loctite in the bearings while putting in the screws. I have learned that it is easy to do. :oops:
If its not the bearings then give David a call.
dunbare
08-03-2006, 01:20 PM
Thanks. I took a file to it and took a little off of each side alternating strokes and now it seams to be fine. David E-mailed me and that was his suggestion also. I'll see how it does.
Ed