12z/ revmax questions

[medflight]

1) If using a pcm 1024 rx, can the revmax be plugged into channel 7? I know it can't be on the 14 channel rx.

2) Are the atv's set at 100/100 or 95/95? The instructions say 95/95 but 14mz set-up I printed off the Model Avionics website says 100/100.

3) Can I do the calibration today and wait until tomorrow at the field to set my headspeeds or do I have to do it all at once?

Thanks for the help!

[Jafa]

1) RevMax does not care what specific channel you use - the TX limitations may impose this on you but I don't have one of these TX's

2) 100/100 on the throttle channel, 95/95 on the AUX channel

3) Calibrate today, set head speed tomorrow, yes

[medflight]

That's what I've got my aux and throttle atv's set at but when I turn on the rx and toggle the aux switch the rm doesn't go into cal. mode.

[Finless]

Yes it can. I am running it that way on my 149 rx.

Bob