PDA

View Full Version : LVC


Jaguar_5
09-02-2009, 03:33 PM
Hey guys

Has anyone either used a voltmeter to check voltage or even better a charger that actually displays mAH put back into the back, and checked if using LVC is ok, or hard on the batteries?

RocketSled
09-02-2009, 05:19 PM
The LCV comes on pretty quick, but the heli flies about the same until right up to the cutoff. I've noticed that sometimes if I try a restart after the cutoff, the voltage drops low enough the Rx stops working. The heli lands and the rotor continues to turn slowly even though I've chopped throttle completely. Batteries are slightly warm after a full flight. I'm too lazy to meter it, but I think the LVC is working about right.