Register Now

JASON671 · 09-03-2009, 02:28 PM

i can not get this thing to track. i tried adjusting the long links from the grips to the swash first. i would get it tracked then after a few pitch pumps its out of track again. should i be adjusting the small links from the grips to the flybar seesaw first?

DriveWRX · 09-03-2009, 04:24 PM

Are you using the aluminum main shaft? If so, switch to a steel main shaft.
There is an issue with the aluminum that caused tracking problems like you described.

JASON671 · 09-03-2009, 04:42 PM

i am using the steel hallow mainshaft.

Ecaf · 09-03-2009, 05:03 PM

Any crashes? Spindle straight? No parts missing in the head?

JASON671 · 09-03-2009, 08:31 PM

nevermind, i got it. i set all the links per the manual and had to turn in the small link on the grip and its dead on and this heli i awesome! only 3 setup flights so far.

09-03-2009, 02:28 PM	#1 (permalink)
JASON671 Registered Users Join Date: Jan 2008	protos tracking problems i can not get this thing to track. i tried adjusting the long links from the grips to the swash first. i would get it tracked then after a few pitch pumps its out of track again. should i be adjusting the small links from the grips to the flybar seesaw first?

09-03-2009, 04:24 PM	#2 (permalink)
DriveWRX Registered Users My HF Map location Join Date: Mar 2007	Are you using the aluminum main shaft? If so, switch to a steel main shaft. There is an issue with the aluminum that caused tracking problems like you described. __________________ MSH Prôtos ...A Better Way to Fly MSH Prôtos Mini Mikado Logo 600 Vergnügenstabi

Thread Tools
Show Printable Version Email this Page
Display Modes
Linear Mode Switch to Hybrid Mode Switch to Threaded Mode

09-03-2009, 04:42 PM	#3 (permalink)
JASON671 Registered Users Thread Starter Join Date: Jan 2008	i am using the steel hallow mainshaft.

09-03-2009, 05:03 PM	#4 (permalink)
Ecaf Registered Users My HF Map location Join Date: Mar 2006	Any crashes? Spindle straight? No parts missing in the head?

09-03-2009, 08:31 PM	#5 (permalink)
JASON671 Registered Users Thread Starter Join Date: Jan 2008	nevermind, i got it. i set all the links per the manual and had to turn in the small link on the grip and its dead on and this heli i awesome! only 3 setup flights so far.

Register Now

Log-in