View Full Version : Lepton manual to download???
rotodingo
08-08-2006, 04:29 PM
Hello,
Does any of you guys know if it is possible to download the manual somewhere?? I need at least exploded views and parts list (about my project to put a Lepton rotor on my Voyager E.) Full manual would be even better. Thanks for your help.
Nicolas
rotodingo
08-12-2006, 08:10 AM
Looks like it can't be found nowhere... Really nobody to scan a few pages and send me PDF files of the exploded views and parts list?
Nicolas
hkb817333
08-13-2006, 12:12 PM
nicolas,
i'll do that for you tomorrow. i can scan all of them for you, anyone need email me.
Kyle
rotodingo
08-14-2006, 02:44 AM
Thank you a lot for the extra work. Full manual is a good thing since i will have to do the assembly of the head...
I think the best is to find a way to make it dowloadable. Maybe it's possible to put it somewhere on helifreak?
Thank you again.
Nicolas
ormandj
08-14-2006, 03:51 AM
Send me a copy to ormandj AT corenode.com and I'll post a copy up for download.
Cheers,
David
hkb817333
08-15-2006, 01:26 AM
I try to scan it, if full manual it is 72 pages
Finless
08-15-2006, 02:13 AM
Actually if you send the scans to me I will get them hosted here on Helifreak and make this a sticky post....
PM me and I will give you my Email address or my server to upload them to. If you can make it a PDF thats great. If not Email each page as I know it will be large file sizes.
BTW I would scan them myself but my scanner is dead.... If it doesnt get scanned my new one will be here in a week.
Bob
rotodingo
08-19-2006, 01:48 AM
Kyle, any progress about the manual scan? I hope you'r not having too much difficulties.
Nicolas
Finless
08-19-2006, 03:48 AM
OK I scanned it myself so it is available for download.
Bob
rotodingo
08-19-2006, 07:52 AM
Thanks a lot Bob.
Nicolas
rotodingo
08-19-2006, 08:09 AM
Sorry to disturb you again bob,
Can you confirm me the main mast as a 8mm outside diameter. Looks that manual is not giving any info about this. It's still for my project to put a Lepton head on a Voyager E.
Thanks a lot.
Nicolas
Finless
08-19-2006, 11:39 AM
Yes the main shaft is 8mm
Bob
rotodingo
08-19-2006, 02:07 PM
Thanks. In fact i realized that i could find this by taking a look to the bearing size in the manual. The only thing i still need is the diameter of the 2 pins pluged in the head and driving the washout base (to know if it's compatible with my voyager E washout). Can you do this ultimate check for me? I would be able to place the order tomorrow in this case.
Beside, do you have the ref number of the new 6,5mm ball of the addendum (replacing the 9,5mm high balls)? No ref number on the addendum sheet. Maybe somebody with the last version of the manual can take a look and give me that? That would be great.
Nicolas
Stuka
08-19-2006, 04:34 PM
The pins are 2mm in diameter and are spaced 13mm apart.
rotodingo
08-20-2006, 01:34 AM
Thank you a lot stucka. Now i got everything i need.
Nicolas
rotodingo
08-20-2006, 01:44 AM
Stucka, in fact i did'nt think at all about the distance between the pins. Good idea you have. Is 13 mm the distance between the center of each pin or, more likely, the minimal distance between the pins (so 15mm between the centers)?
Nicolas
Stuka
08-20-2006, 03:24 AM
They are 13mm center to center.
rotodingo
08-20-2006, 03:35 AM
Bad news... I will have to buy also the Lepton Wash-out... The Voyager E wash-out base will not accept this and the mixing arm are using 2.6mm screws instead of 2mm on the Lepton. So I can't use the K&S arms. Maybe i will buy a Lepton kit. This way i will have a B plan if this doesn't work.
Thanks again for the help.
Nicolas
mudbogger2
08-20-2006, 12:06 PM
Maybe i will buy a Lepton kit.
Go ahead and do it. You will forget all about that silly V-E thingy. :mrgreen:
rotodingo
08-29-2006, 04:54 PM
It's done. My lepton will ship tomorow. I just bought also some carbon parts from MJP carbon.
I will keep you informed of the results.
Nicolas
Hi bob
can you show me where I can down load manuel for lepton
cheers
Hung