DX6 on G3???

[esldallastx]

Does anybody use it? if so, how do you setup the flight mode switches???

Thanks in advance

[myrddin]

Has anyone figured this out? I am able to use the emulator abd a JR flight sim cable to get it to load up and it works finn, howerver if you bring up the radio pop up you can see the stick move ments are off. If you move the idle up it also moves the right stick into a left roll... Is this because the radio is set up for cde (T-Rex) mode?

Any help would be cool

[vitek]

Yes, the DX6 should work. I know there are a few guys out there that are using it. One current problem is that you don't have all 8 channels expected to be available to the aircraft configurations. You might have to edit some models to get the throttle/governor working or disabled.

Your transmitter needs to be setup for a standard servo configuration. That means one servo for roll, one for pitch, and another for collective. The T-Rex is CCPM, so you need to use a blank model memory if you want to use your DX6.

Travis

[myrddin]

I am able to get it to work fine in FMS, just had to pick the right order for the channels. How do I set up my transmitter to do that, I am guessing you mean turn off cpm? And do you know if I can have more than one heli on the transmitter? Like heli1, heli2 etc...


Thank you for your help.
Mike

[vitek]

Until you get to know your radio a little better, it may be best to just use the Interlink. Yes, the DX6 has multiple model memories. Yes, you need to set the swashplate type to a standard 3 servo setup.

Travis

[myrddin]

I see that it has up to 10 heli and 10 plane and I see how you get in and add models... My only question is do I just keep it at the defaults on the new model?

thnx and u r right Im still learning about the DX6.
Mike

[myrddin]

update:

I made the change. chose new model and made it a heli. I did not change anything else and it seams to work fine....

[MONDO50M]

I have a DX6 and can not get inverted flight to work (idle 1). Has anyone been able to do this? If so, PLEASE HELP!!!