armsmaster
08-11-2006, 02:02 AM
I have for sale a Century Hawk full of upgrades. I am upgrading to a Predator 90 and this would make a great heli for the right person. I have well over $1000.00 invested, I am asking $650.00 for everything listed below. The heli is loaded with upgrades and I am including some new and used spare parts. The toki has less than 2 gallons of fuel through it. The JR servo's are new with less than 10 flights on them. RX battery cycles out to 92% capacity. If interested please PM me for further info and photo's. I prefer paypal and will require an additional 3% plus actual shipping charges.
Hawk Pro $199.99
JR G500T gyro $149.99
3 JR DS821 Digital servo's @ $29.99= $89.97
Hitec HS525 throttle $29.49
CS-75MG Coreless .06 sec/60 deg 79 oz/in (rudder)$42.99
TT 550mm carbon Main blades $69.95
JR heavy duty switch $14.95
Sanyo 4.8v 1700MAh nicad RX battery $28.00
misc. fuel lines, filters,
Toki 40 engine w\tuned muffler $159.99
Heli Max blade holder $6.95
Now for the Upgrades
HI3181A Hard dampeners $4.95
Hot dog Paddles (purple) $6.95
CN2215P Machined head button (purple) $9.95
CN2137 2oz. Header tank $11.95
CN2202 Aluminum turbo cooling fan $39.95
CN2208P Antirotation bracket (purple) $15.95
CN2263 Constant tail Drive $54.95
CN2225 Machined clutch bell $29.95
CN2221 6mm Spindle upgrade $39.95
CN2239C Carbon Tail servo mount $19.95
Cn0520BS Stainless Steel Torque tube $53.95
Spare Parts New\Used
New In Package:
HW3180A 6mm Spindle shaft $8.95
HI3202 Tail Boom Support Clamp $2.95
HI3032C Elevator arm $10.95
CN2263F Counter Gear (constant tail drive) $8.95
HW3115A Servo frame set $22.95
HW3112C Lower Side Frame Set $28.95
HI3179 Flybar paddles $15.95
Used or new parts:
Cooling fan (new)
Clutch (new)
2)counter gears (1new)(1used)
Stock flybar paddles used
Horizontal tail fin (new)
Radio tray (new)
tail gear box w\tail rotor assembly (used no gears)
swash plate (used)
washout hub w\arms (used)
2 main blade grips with bell mixers (used)
Tail boom supports (used)
Aluminum torque tube (used)
Stock clutch bell (new)
As you can see if you add up everything not counting the spare used parts there is well over $1200.00 invested. I think $650.00 plus shipping is fair. I last flew this heli on July 30 at a local funfly. I have pics from the funfly available. If interested please PM me for photo's and further details.
Thanks,
Perry
[/img]
Hawk Pro $199.99
JR G500T gyro $149.99
3 JR DS821 Digital servo's @ $29.99= $89.97
Hitec HS525 throttle $29.49
CS-75MG Coreless .06 sec/60 deg 79 oz/in (rudder)$42.99
TT 550mm carbon Main blades $69.95
JR heavy duty switch $14.95
Sanyo 4.8v 1700MAh nicad RX battery $28.00
misc. fuel lines, filters,
Toki 40 engine w\tuned muffler $159.99
Heli Max blade holder $6.95
Now for the Upgrades
HI3181A Hard dampeners $4.95
Hot dog Paddles (purple) $6.95
CN2215P Machined head button (purple) $9.95
CN2137 2oz. Header tank $11.95
CN2202 Aluminum turbo cooling fan $39.95
CN2208P Antirotation bracket (purple) $15.95
CN2263 Constant tail Drive $54.95
CN2225 Machined clutch bell $29.95
CN2221 6mm Spindle upgrade $39.95
CN2239C Carbon Tail servo mount $19.95
Cn0520BS Stainless Steel Torque tube $53.95
Spare Parts New\Used
New In Package:
HW3180A 6mm Spindle shaft $8.95
HI3202 Tail Boom Support Clamp $2.95
HI3032C Elevator arm $10.95
CN2263F Counter Gear (constant tail drive) $8.95
HW3115A Servo frame set $22.95
HW3112C Lower Side Frame Set $28.95
HI3179 Flybar paddles $15.95
Used or new parts:
Cooling fan (new)
Clutch (new)
2)counter gears (1new)(1used)
Stock flybar paddles used
Horizontal tail fin (new)
Radio tray (new)
tail gear box w\tail rotor assembly (used no gears)
swash plate (used)
washout hub w\arms (used)
2 main blade grips with bell mixers (used)
Tail boom supports (used)
Aluminum torque tube (used)
Stock clutch bell (new)
As you can see if you add up everything not counting the spare used parts there is well over $1200.00 invested. I think $650.00 plus shipping is fair. I last flew this heli on July 30 at a local funfly. I have pics from the funfly available. If interested please PM me for photo's and further details.
Thanks,
Perry
[/img]