Steve Joblin
09-26-2009, 09:38 AM
One of our members was having difficulty with his 4G6... it turned out that he had accidently installed the blade holders backwards! SQRT(-2) wins the "Detective of the Week Award for spotting the issue!
So for anyone that may have a similar issue, please use this picture as reference on the correct way that the blade holders should be installed:
http://www.helifreak.com/attachment.php?attachmentid=117066&stc=1&d=1253975897
Recently I had a crash and had to change the tail gear on my 4G6, because I am a real newbie I had to almost take away all the parts to reach the tail gear.
After putting all together now the heli push himself down instead of going up.
Everything seems at their correct place and the blade direction is also right but no way he push himself down.
I also went thru manual and create a new heli exactly like the manual setting but still same.
Please someone help:arggg:.
PS, sorry for bad English.
So for anyone that may have a similar issue, please use this picture as reference on the correct way that the blade holders should be installed:
http://www.helifreak.com/attachment.php?attachmentid=117066&stc=1&d=1253975897
Recently I had a crash and had to change the tail gear on my 4G6, because I am a real newbie I had to almost take away all the parts to reach the tail gear.
After putting all together now the heli push himself down instead of going up.
Everything seems at their correct place and the blade direction is also right but no way he push himself down.
I also went thru manual and create a new heli exactly like the manual setting but still same.
Please someone help:arggg:.
PS, sorry for bad English.