PDA

View Full Version : Most feature packed 10s charger?


sgrim80
10-08-2009, 08:47 PM
Hey guys,

I'm in the market for a 10s charger. One that will charge a true 10s pack. I've been looking at the Cellpro 10s and the TP1010. Is there another charger I should be looking at? Right now I'm planning on going with the Cellpro 10s.

Thanks for any opinions.

Steve

TJinGuy
10-08-2009, 10:40 PM
There is also the iCharger 1010B+.

sgrim80
10-09-2009, 08:09 AM
Anyone else with an opinion? Come on, there are plenty on this forum!

HeathH
10-09-2009, 08:30 AM
i have only used 1010c and they work well, but the data ports wear out kind of fast. other than that they are great. They dont put out enough wattage though to keep up with the new lipo tech.

flynhawn
10-10-2009, 02:39 AM
I've been using the CellPro 10s for about 2 months now and I really like it. But I'm only charging 2-3s batteries at a time and not the single 10s that you'll be doing. Also, I haven't "pushed" my charger to its' limits yet due to the limitations of my converted ATX PS.

Skint Eastwood
10-10-2009, 03:05 AM
I have the bantam 902 which will charge a 12 s 4000 mah at 2c with ease it needs a seperate pair of balancers though

TJinGuy
10-10-2009, 08:12 AM
Uh no it can not. The 902 is rated at 200W max. That limits 12s charging to about 4A. So a 12s 4000 could be charged at 1C.

Skint Eastwood
10-10-2009, 09:35 AM
Yes you are right, in fact it starts off at around 7 amps but about half way thru the charge once the voltage picks up its down to 3/4 amps.

Uh no it can not. The 902 is rated at 200W max. That limits 12s charging to about 4A. So a 12s 4000 could be charged at 1C.