OICU812
08-21-2006, 03:50 AM
After tinkering with different setups, here is the one currently on my Logo 14s'.
Orbit 30-12 with 14 tooth.
Goverened at 75% with a HS @2140 rpm.
Pretty good results so far. This graph shows my data recorded today, temp 1 being the Lipo, temp 2 beign the esc and then of course all other data shown and the max and averages on bottom shown.
66.4 amps was the max amps pulled
2415 max watts
109 Deg F for lipo
120 Deg F for ESC
33.8 was the min pack voltage
2552 mah used, this was all in a 6 minute flight including spoolup and down. :)
As soon as Gary from TP can get his hands on the Z Hacker model I may try that one and do some testing as well to find out what that motor can do and what the real numbers are on max amps pulled and the temps it creates and so fourth.
Orbit 30-12 with 14 tooth.
Goverened at 75% with a HS @2140 rpm.
Pretty good results so far. This graph shows my data recorded today, temp 1 being the Lipo, temp 2 beign the esc and then of course all other data shown and the max and averages on bottom shown.
66.4 amps was the max amps pulled
2415 max watts
109 Deg F for lipo
120 Deg F for ESC
33.8 was the min pack voltage
2552 mah used, this was all in a 6 minute flight including spoolup and down. :)
As soon as Gary from TP can get his hands on the Z Hacker model I may try that one and do some testing as well to find out what that motor can do and what the real numbers are on max amps pulled and the temps it creates and so fourth.