Pics of my BCP

[steve28]

this BCP is using all my separate electronics from my spare parts assortment. I bought that airframe only kit, it did come with motors so I only had to scrap the DC main motor , Im still using the stock DC tail motor.
please dont judge me by my wiring , its a bit untidy .

non bell hiller head
e-flight park 370 3600 KV + heatsink
pheonix 10 A ESC
GY190 gyro , GWS 5 A DC ESC
stock DC tail motor + heatsink
aluminum twin tail motor mount ( adjustable motor mounting for gear mesh )
3 spektrum S75 on collective
3 Cell Thunder Power 1320 mAh
aluminum landing skids
SPektrum Rx
GWS white dragonfly canopy trimmed to fit

this heli is a blast to fly and isnt as intimidating as my REX I built this heli after I already had my T-REX

[BIGGAME121]

Hey steve28

What brand is your airframe? I have only seen the CNC and that one does not come with motors or anything else.

Or if anyone else knows please PM me or leave a post thanx..

[steve28]

The airframe is the Blade CP , Its the airframe that comes in the
"almost ready to fly" kit , all that was included was , the airframe ( including rotor head , base plate , tail boom and tail motor mount , landing skids and legs ) , main motor , tail motor
it didnt include , TX RX , speed controls , gyro , revo mixing
i already had all this stuff so it was perfect , the kit cost 99 $ CAN

Since I posted these pics I have upgraded the swashplate to aluminum and upgraded the head to the Bell Hiller Mix head , it makes a difference , more agility.
Oh and I almost forgot Carbon Fiber main blades . this was all in the 48 hours .

[BIGGAME121]

Is your airfrme alum? from the pics the landing gear looks like it

[steve28]

ah , the landing gear thats right , what I did there was I removed the original skids and got some aluminum pipe from the LHS they had a bunch of small diameters , I bought I think a foot of the stuff , I just bent the end and drilled a couple holes to fit the legs and glued the legs into the holes using CA , the legs are original carbon material and the rest of the frame is plastic .

i was flying this heli today , first flights with the new CF main blades , after I adjusted the tracking the heli flew smooth . this BCP is becoming almost more fun to fly than my T-REX ( cost is a bit less , and its less sensitive ) .

I havnt tried stall turns with my T-REX but Ive done em on this BCP

[steve28]

correction the BCP is not more fun to fly than my T-REX , just a clarification . :wink: