AR7100R setup help?

[justin keaton]

im using dx-7 radio and have the ar7100r and need to know how much more gain do you add going from travel adjust to gyro menu for gyro gain? i always used travel adjust and never used gyro menu. also does the aux2 travel adjust stay 100%
-100%

and on gear travel adjust what am i supposed to use top and bottom number or just top?

[Jasmine2501]

Depends on what you are trying to convert from. Just set up the gain like you normally would - that is, find new numbers. If you want to switch back and forth between two numbers, you can use the gear channel and the gear switch to change them - you get a range from -100 to +100. If you want both numbers to be heading hold mode, you'll want to put both numbers into the positive.

If you are just changing receivers, it should be all the same. AUX2 doesn't do anything - you don't have any servos plugged in there, right?

[justin keaton]

aux2 is were the gyro gain wire goes on the 7100r if im reading it right and the aux2 switch controls gear travel adjust and not aux2? it says you cant use travel adjust for gyro gain on the 7100r. and thats how ive always done it, on the 7000 so im having to use the gyro menu now, and the gear in travel adjust sets the rev limiter, right?

[justin keaton]

ok is anyone using the ar7100r and dx7? if so what are your settings? this would get me in the air and i can go form there after seeing someone elses setup. thanks

[Sonic_BOOMER_SOONER]

This post will be overkill for you, but the entire thread is useful.

http://www.helifreak.com/showpost.php?p=1451333&postcount=249